Wago Coupler for use with I/O Modules

  • RS Stock No. 508-3842
  • Mfr. Part No. 750315
  • Manufacturer Wago
Technical data sheets
Legislation and Compliance
Non Compliant
COO (Country of Origin): DE
Product Details

Wago MODBUS Fieldbus Coupler

The Wago Modbus Fieldbus coupler, RS 485/1,2 - 115,2k Baud allows connection of the WAGO-I/O-SYSTEM as a slave to the MODBUS or Fieldbus. It recognizes all the connected I/O modules and creates a local process image on this basis. Analogue and speciality module data is sent via words and/or bytes, digital data is sent bit by bit. It allows the storage of the process image in the corresponding Master control (PLC, PC or NC).
Couplers series 750 Wago I/O system
Range of couplers for analogue and digital signals
Enables I/O connection to various protocols Modbus, Ethernet, Profibus and Interbus
Configuration simplified with switches or rotary encoders
The joint should be connected to the end of the loop, to guarantee the correct transmission of the data and enable the whole assembly to function correctly
Wago I/O system range
Remote I/O modular system for all functions
Makes it easier to connect all I/Os thanks to its cage clamp system
Communication with PC, PLCs because of the various communication protocols
Colour codes according to the type of signal

Features and Benefits

DIN 35 rail, cage clamp connection
Maximum number of I/O modules is 64
DIP switch and 2 decimal coder configuration
Voltage supply is 24VDC
Input current maximum is 500mA at 24V
Isolation is 500V system/supply
Operating temperature ranges between 0°C and 55°C


IP20 rated
CE EN 50082-2 (1996), EN 50081-1 (1993)
cULus approved
IEC 60068-2-6
IEC 60068-2-27

Attribute Value
Accessory Type Coupler
For Use With I/O Modules
Temporarily out of stock - back order for despatch 22/09/2020, delivery within 4 working days from despatch date
Price Each
MYR 2,022.30
Per unit
1 +