Banner Through Beam (Receiver) Photoelectric Sensor 20 m Detection Range PNP IP69K Barrel Style T18SP6R

  • RS Stock No. 405-7252
  • Mfr. Part No. T18SP6R
  • Manufacturer Banner
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): US
Product Details

Short Length M18/M30 Receivers

Receiver devices for use with M12 laser transmitters, Item 1
Housing design reduces mounting depth compared to standard barrel sensors
Plastic housing - M18 or M30 front 'nose' mount
2 status LEDs
PNP outputs with full protection; switch plus alarm
2m pre-cabled or M12 connector
10-30Vdc supply voltage
Response time 3ms (On); 1.5ms (Off)
IP67 ingress protection

Caution

Laser radiation is harmful to the human eye and under no circumstances should the laser beam be viewed directly or via optical instruments.

Supplied with

mounting bracket

Specifications
Attribute Value
Sensor Style Barrel
Detection Type Through Beam (Receiver)
Detection Range 20 m
Output Type PNP
Electrical Connection 4-Wire Cable 2m
Maximum DC Voltage 30V
Light Source Infrared
IP Rating IP69K
Maximum Current 150 mA
Response Time 3 ms
Housing Material PBT, Plastic
Minimum Operating Temperature -40°C
Maximum Operating Temperature +70°C
2 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 328.66
units
Per unit
1 - 5
MYR328.66
6 +
MYR317.81
Related Products
Through-beam (Infrared LED), Retro-reflective (Visible red LED) and ...
Description:
Through-beam (Infrared LED), Retro-reflective (Visible red LED) and Diffuse scan (Infrared LED) photoelectric sensors. IP67 rated PBT housing with methacylate lensPNP and NPN output configurationsLight ON/dark ON selectableSmall dead-band for sensing close targetsRetro-reflective versions have polarised light ...
High operating range, very small housingComplete device, no ...
Description:
High operating range, very small housingComplete device, no amplifier neededOperating voltage 10 → 30VdcOptical parts made of glass, easy cleaningPre-fault indicationOperating voltage 10 → 30VdcTemperature range 0 → +55°C.
Optosensors for the food industry and factory automationProtection ...
Description:
Optosensors for the food industry and factory automationProtection rating: IP68High chemical resistance thanks to use of special materials2 different connection techniquesEasy assembly through snap-fitting to V4A mounting baseCompatible 4-pole M8 cable, e.g.: RS stock no.: 282-928.
Stainless steel body versions of the E3Z family ...
Description:
Stainless steel body versions of the E3Z family specially designed to meet the demanding conditions that are found within food processing environments. Made from food-grade materials, the sensors have been designed so that the detergents and disinfectants used in these ...