LeCroy PP022 Oscilloscope Probe, Probe Type: Passive 500MHz

  • RS Stock No. 922-5258
  • Mfr. Part No. PP022-1
  • Manufacturer LeCroy
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

Teledyne LeCroy Passive Probe PP022

Passive probes are the standard probe provided with most oscilloscopes. They are also sold as separate items and as replacements. The PP022 (PP022-1 single pack, PP022-2 two pack) has 500 MHz bandwidth, 10 pF input capacitance and 2.5 mm probe tip diameter. It is typical of passive probes in that it provides a 10:1 attenuation and features a high resistance of 10 MΩ. Its high input resistance makes the passive probe a choice instrument for low frequency signals, because circuit loading at such frequencies is minimised. Passive probes are designed to handle voltages of at least 400 V. The PP022 handles up to 500 V. Teledyne LeCroy passive probes feature an attenuation sense pin which activates the oscilloscope to scale waveforms automatically, with no operator input.

Note

The PP022 passive probe is compatible with Teledyne LeCroy WaveSurfer MXs-B and MSO MXs-B, WaveRunner 6 Zi and HRO 12-bit oscilloscopes. Using the appropriate passive probe with an oscilloscope means that the probe will be properly compensated across the entire bandwidth. Otherwise compensation will be for low frequencies only.

Supplied with

Ground lead with alligator clip, rigid probe tip (installed), rigid probe tip (replacement), short collar (installed), sprung hook, trimmer tool, long collar, IC tip insulators (black, brown, blue, green, grey - 1 off each), tip insulator 2.5 mm, probe tip cover, BNC adapter 2.5 mm, swivel ground lead, swivel ground lead adapter, ground spring, PCB adapter, spring tip, colour coding rings (yellow, red, green, blue - 2 off each)

Passive Oscilloscope Probes

Note

All the products in this range are supplied for use with instruments with a permanent earth connection.

Specifications
Attribute Value
Probe Type Passive
Attenuation 1:10
Bandwidth 500MHz
Connector Type BNC
Model Number p PP022
Number of Probes 1
Safety Category Level CAT I, CAT II
Safety Category Voltage 400 Vrms, 500 Vrms
Safety Category CAT I 500 Vrms, CAT II 400 Vrms
Rise Time 700ps
3 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 1,996.88
units
Per unit
1 +
MYR1,996.88
Related Products
The PicoConnect 442 probe is a 25:1 attenuating ...
Description:
The PicoConnect 442 probe is a 25:1 attenuating probe that enables the PicoScope 4444 differential oscilloscope to measure large-amplitude voltages up to ±1000 V, or voltages with a large common-mode offset. Such voltages are found in electrical power converters, inverters, ...
The Teledyne LeCroy HVFO103 (RS 136-8330) is a ...
Description:
The Teledyne LeCroy HVFO103 (RS 136-8330) is a high voltage (HV) fibre-optically isolated 60MHz oscilloscope probe that is designed for the measurement of small signals floating on a high voltage bus in power electronics designs. Optical isolation between the probe ...
Bandwidth 500 MHzProbe Ratio 10:1Cable Length 1.2 metersInput ...
Description:
Bandwidth 500 MHzProbe Ratio 10:1Cable Length 1.2 metersInput Impedance 10 MOhmCapacitance 12 pFApprox. Rise Time 3 nsMax. Voltage 1000 V CAT III / 600 V CAT IVCompensation Range 10 to 22 pFSafety Rating 1000 V CAT III / 600 V ...
RS Pro Passive Oscilloscope Probe RS-LF Series. Ergonomically ...
Description:
RS Pro Passive Oscilloscope Probe RS-LF Series. Ergonomically designed probe suitable for use with all major brands of oscilloscopes as well as our range. RS Pro passive oscilloscope probes don't require a power supply or batteries so are lightweight and ...