Pico Technology Oscilloscope Probe, Probe Type: Active, Differential 200MHz 60V

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): TW
Product Details

Pico 200MHz 20V Differential ProbeTA045, 10:1

Pico TA045 is a 200MHz bandwidth active differential probe suitable for high-speed measurement applications with a differential measurement range of ±20V and a common-mode range of up to ±60V (DC + peak AC). This differential probe extends the functionality of standard single-ended input oscilloscopes to allow a safe and accurate method of making high-voltage differential measurements. Applications include making safe measurements in power circuit applications and acquisition of low-speed balanced differential signals found in serial communications buses. The TA045 is optimised for small-signal applications such as telecom measurement, xDSL, high-speed power measurement and differential transmitter and receiver design.

Bandwidth DC to 200MHz (–3 dB)
Attenuation 10:1
Rise time 1.75ns
Accuracy ±1%
Input impedance 500kΩ ll 7pF each side to ground
Differential range ±20V
Common mode range ±60V
Absolute maximum voltage (either input to ground) ±60V
Swing (into 50 Ω load) ±2V
Offset (typical) <±2mV
Noise (typical) 0.3mVRMS
Source impedance (typical) 50Ω
CMRR (typical) 80dB @ 100Hz; 50dB @ 10MHz
Ambient operating temperature -10 to +40°C
Ambient storage temperature -30 to +70°C
Power requirement 4xAA cells or 6VDC/90mA mains adaptor or 9VDC/70mA mains adaptor
Length of input leads 50cm
Length of BNC lead 125cm
Weight 300g
Dimensions 111 x 22 x 14 mm

Pico Technology Oscilloscope Probe

The Pico Technology TA044 active differential oscilloscope probe is suitable for high-speed measurement applications with a differential measurement range of ±20V and a common-mode range of up to ±60V. It can be used with signal speeds of up to 200MHz. This differential probe extends the functionality of standard single-ended input oscilloscopes to allow a safe and accurate method of making high voltage differential measurements.

Features and Benefits

• Bandwidth is DC to 200MHz (-3dB)
• Attenuation ratio is 10:1
• Accuracy is ±1%
• Input impedance is 500Kohm ll7pF each side to ground
• Differential range is ±20V
• Common mode range is ±60V
• Absolute maximum voltage (either input to ground) is ±60V
• Swing is ±2V into 50ohm load
• Offset (typical) is <±2mV
• Noise (typical) is 0.3mV RMS
• Source impedance is 50ohm
• CMRR (typical) is 80dB at 100Hz and 50dB at 10MHz
• Ambient operating temperature ranges between -10°C and 40°C
• Power requirement is 4xAA cells or 6VDC/90mA mains adaptor or regulated 9VDC/40mA mains adaptor

Applications

• Safe measurement in power circuit
• Acquisition of low-speed balanced differential signals found in serial communications buses
• Telecom measurement
• xDSL,
• high-speed power measurement and differential transmitter and receiver design.

Certifications

• IEC-1010.1
• IEC-1010.2-031 CAT III
• Pollution Degree 2.

Specifications
Attribute Value
Probe Type Active, Differential
Attenuation 1:10
Bandwidth 200MHz
Maximum Common Mode Input Voltage 60V
Number of Probes 2
Safety Category Level CAT I
Safety Category Voltage ±60V
Safety Category CAT I ±60V
Discontinued product
Related Products
The Keysight N2140 and N2142A are extremely low-cost ...
Description:
The Keysight N2140 and N2142A are extremely low-cost passive probes that provide a switchable 10:1/1:1 attenuation and 75 MHz or 200 MHz bandwidth. They feature a high input resistance of 10 MΩ (switchable to 1 MΩ) to address a wide ...
For high-speed switch mode power supply design; CAN/LIN ...
Description:
For high-speed switch mode power supply design; CAN/LIN bus design; high-speed digital design; digital design and characterization; manufacturing engineering test; research and development. ±42 V (DC + pk AC) differential input voltage 18 dB CMRR (at 250 MHz 50X attenuation) ...
Compact design with a 2.5mm probe tip diameter ...
Description:
Compact design with a 2.5mm probe tip diameter provides better visibility to the circuit under test than conventional 5mm or 3.5mm probe tips. This makes it easier to probe today’s fine pitched space ICs and components. The replaceable probe tip ...
Accessories available for Tektronix TPS2000 Series digital storage ...
Description:
Accessories available for Tektronix TPS2000 Series digital storage oscilloscopes include: passive probes P2220 ( 481-0823 ) & P5122 ( 712-1141 ); current probes A621 ( 851-218 ) & A622 ( 851-224 ); power measurement and analysis bundle TPS2PBND2 ( 712-1145 ...