LeCroy HVP120 Oscilloscope Probe, Probe Type: Passive 400MHz

Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): US
Product Details

Teledyne LeCroy High Voltage Passive Probe HVP 120

The Teledyne LeCroy HVP120 is a high voltage passive probe designed for probing up to 1000 Vrms and capable of handling up to 6000 V peak transients. Its fast rise time and excellent frequency response make it suitable for a wide variety of high voltage measurement applications. The HVP120 features a spring-loaded probe tip and a variety of standard accessories to make probing high voltages safe and easy.

Attenuation 100:1
Bandwidth 400 MHz
Input capacitance 7.5 pF
Maximum input voltage 1kV AC rms or DC, 6kV peak AC
Connector type BNC with ReadOut
Compensation range 10-50 pF
Rise time 900 ps
Cable length 2m

Supplied with

Trimming tool, ground lead, rigid tip, IC insulator, BNC adaptor, tip insulator, spring hook, red crocodile clip, 4 mm safety adaptor, safety ground lead, green/yellow crocodile clip

Specifications
Attribute Value
Probe Type Passive
Attenuation 1:100
Bandwidth 400MHz
Connector Type BNC
Model Number p HVP120
Safety Category Level CAT I, CAT II
Safety Category Voltage 1000 Vrms, 6000 V
Series HVP
Safety Category CAT I 6000 V, CAT II 1000 Vrms
Rise Time 900ps
5 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 2,729.84
units
Per unit
1 +
MYR2,729.84
Related Products
The TA300 is a 100 kHz bandwidth, single-range ...
Description:
The TA300 is a 100 kHz bandwidth, single-range 40 A AC or DC current probe using the D9 connector specific to the PicoScope 4444 differential oscilloscope. On connection with the scope, the probe is instantly sensed and the vertical range ...
When you use the oscilloscope in its usual ...
Description:
When you use the oscilloscope in its usual context to show and measure circuit shaft formations, you are working in the most common mode for voltage measurements. The differential probe enhances the oscilloscope probe's measuring capabilities with performance conversion, inverters, ...
Compact design with a 2.5mm probe tip diameter ...
Description:
Compact design with a 2.5mm probe tip diameter provides better visibility to the circuit under test than conventional 5mm or 3.5mm probe tips. This makes it easier to probe today’s fine pitched space ICs and components. The replaceable probe tip ...
Low-cost general-purpose probes featuring a high input resistance ...
Description:
Low-cost general-purpose probes featuring a high input resistance for low probe loading. They can be adjusted for low-frequency and high-frequency compensation. • Bandwidth is DC to 500MHz (–3dB)• Attenuation ratio is 10:1• Cable length is 1.3M• Input impedance is 10Mohm ...