Tektronix TPP0201 Current Probe & Clamp, Probe Type: Passive 200MHz 300V

  • RS Stock No. 726-0041
  • Mfr. Part No. TPP0201
  • Manufacturer Tektronix
Technical data sheets
Legislation and Compliance
RoHS Status: Exempt
COO (Country of Origin): CN
Product Details

Tektronix Oscilloscope Probes

The Tektronix passive voltage oscilloscope probe is for use on BNC oscilloscopes with 1Mohm/13pF input. It has an attenuation of 10X with 10Mohm input resistance.
Supplied with:
Retractable hook tip
Ground spring
Ground lead with alligator clip
Note:
All the products in this range are supplied for use with instruments with a permanent earth connection.

Features and Benefits

Bandwidth is DC to 200MHz
Attenuation ratio is 1:10
Input impedance is 10Mohmll12pF
Length is 1.3m
Maximum common-mode input voltage is 300KV
Maximum Input voltage is 300 VRMS CAT II
Wide compensation ranges between 15pF and 25pF)

Applications

Relative low frequency measurements
Low frequency computer and telecom measurements
Power supplies
Low frequency amplifiers

Certifications

UL61010-031 approved
2007, CAN/CSA C22.2 No. 61010-031-07 certified
IEC61010-031
IEC 61010-031/A1:2008
CAT I 400 VAC
CAT II 300 V
CAT II 300 VAC

Specifications
Attribute Value
Probe Type Passive
Attenuation 1:10
Bandwidth 200MHz
Maximum Common Mode Input Voltage 300V
Connector Type BNC
Model Number p TPP0201
Safety Category Level CAT I, CAT II
Safety Category Voltage 300 V, 300 V ac, 400 V ac
Series TPP
Safety Category CAT I 400 V ac, CAT II 300 V, CAT II 300 V ac
Rise Time 2.3ns
42 In Global stock for delivery within 4 - 6 working days
Price Each
Was MYR343.88
MYR 339.64
units
Per unit
1 +
MYR339.64
Related Products
Dual range a.c. current clamp nominal measuring ranges ...
Description:
Dual range a.c. current clamp nominal measuring ranges 0.1A to 20A a.c. and 0.5A to 200A a.c.Safe, non intrusive current measurement40Hz to 10kHz bandwidthErgonomic jaw design for measurement where access is difficult and allows 'hooking' onto the cableMax. conductor size ...
The Fluke i30s AC/DC current clamp has a ...
Description:
The Fluke i30s AC/DC current clamp has a current range of 30A. It is a new age device used with oscilloscopes and DMMs for accurate, non-intrusive measurement and complex waveform currents. Inclusions:Alkaline PP3 battery, 4mm shrouded plug adaptor, and an ...
Suitable for use with oscilloscopes, recorders and data ...
Description:
Suitable for use with oscilloscopes, recorders and data loggers a.c. coupled output (no d.c. offset) Voltage output of 3V full scale for each range Fits around conductors up to 160mm diameter Extended battery life and external power supply input Meets ...
Various bandwidths: DC to 50 MHz, 100 kHzDC ...
Description:
Various bandwidths: DC to 50 MHz, 100 kHzDC and AC measurementsSuperior accuracy and high signal to-noise ratioLow circuit insertion lossBattery powered with BNC connector or oscilloscope powered AutoProbe interface.