Tektronix P5122 Oscilloscope Probe, Probe Type: High Voltage, Passive 200MHz

  • RS Stock No. 712-1141
  • Mfr. Part No. P5122
  • Manufacturer Tektronix
Technical data sheets
Legislation and Compliance
RoHS Status: Exempt
Product Details

TPS2000 Accessories

Accessories available for Tektronix TPS2000 Series digital storage oscilloscopes include: passive probes P2220 ( 481-0823 ) & P5122 ( 712-1141 ); current probes A621 ( 851-218 ) & A622 ( 851-224 ); power measurement and analysis bundle TPS2PBND2 ( 712-1145 ); battery TPSBAT ( 481-0867 ) & battery charger TPSCHG ( 481-1290 ); soft carrying case AC2100 ( 481-0845 ) & hard carrying case HCTEK4321 ( 613-1510 ).

Tektronix Oscilloscope Probes

The Tektronix oscilloscope probe when coupled with the TPS2000 and THS3000 series digital storage oscilloscopes, delivers both the isolation for the measurement from earth ground and full isolation between the channels. It is the recommended probe for measuring ripple on high voltage DC supplies. This probe should not be used on the TPS2000 series oscilloscopes for AC coupled measurements on signals with greater than 300VDC offset.

Features and Benefits

• Bandwidth is DC to 200MHz
• Attenuation ratio is 1:100
• Input impedance is 100Mohmll4pF
• Rise time is 2.2ns
• Floatable up to 600VRMS CAT II
• Maximum Input voltage DC or RMS is 1000VRMS CAT II
• Wide compensation ranges between 7pF and 30pF


• Power supply design
• Design motor drive
• Electronic ballast
• Power semiconductors
• Switch mode control
• UPS systems
• Power converters


• IEC61010-031
• CAT II 1000 VAC

Attribute Value
Probe Type High Voltage, Passive
Attenuation 1:100
Bandwidth 200MHz
Model Number p P5122
Safety Category Level CAT II
Safety Category Voltage 600 V ac, 1000 V ac
Series TPS2000
Safety Category CAT II 1000 V ac, CAT II 600 V ac
Rise Time 2.2ns
5 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 1,591.37
Per unit
1 +
Related Products
First entry-level oscilloscopes featuring 1GS/s sampling rate and ...
First entry-level oscilloscopes featuring 1GS/s sampling rate and optional parallel bus trigger and decode modules. "Digital phosphor" technology enables real-time intensity grading of the signal, mimicking the effect of a VT phospor oscilloscope display. 100 MHz, and 200 MHz models1 ...
Bandwidth DC-70 MHzRise time ≤5 nsDC accuracy ±2%Attenuation ...
Bandwidth DC-70 MHzRise time ≤5 nsDC accuracy ±2%Attenuation ratio 50 X/500 XMaximum differential test voltage (DC + Peak AC) 50 X: 150 V, 500 X: 1500 VMaximum input common mode voltage (voltage-to-earth Vrms) 600 V CATIII, 1000 V CATIIInput impedance ...
The TA300 is a 100 kHz bandwidth, single-range ...
The TA300 is a 100 kHz bandwidth, single-range 40 A AC or DC current probe using the D9 connector specific to the PicoScope 4444 differential oscilloscope. On connection with the scope, the probe is instantly sensed and the vertical range ...
For high-speed switch mode power supply design; CAN/LIN ...
For high-speed switch mode power supply design; CAN/LIN bus design; high-speed digital design; digital design and characterization; manufacturing engineering test; research and development. ±42 V (DC + pk AC) differential input voltage 18 dB CMRR (at 250 MHz 50X attenuation) ...