Keysight Technologies N2871A Oscilloscope Probe, Probe Type: Passive 200MHz

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): MY
Product Details

Keysight N2870A Series Passive Probes and Accessories

Compact design with a 2.5mm probe tip diameter provides better visibility to the circuit under test than conventional 5mm or 3.5mm probe tips. This makes it easier to probe today’s fine pitched space ICs and components. The replaceable probe tip is also spring loaded, keeping it from slipping off the device being probed. To minimize the inductive effects that cause ringing of high speed signals, the innovative ground blade or spring ground connection can be used. Adhesive copper pads provided with the probe can be attached on top of an IC and connected to its ground pins to create a convenient ground plane for the probe to connect to. When used with the ground blade this method provides an ideal ground connection for probing signals with high frequency contents. The IC cap fits over the probe tip, providing a convenient self-aligning connection to fine-pitch IC pins.

Weight (probe only) 48g
Cable length 1.3m
Operating temperature 0 °C to +50°C
Non-operating temperature -40 °C to +70°C
Operating altitude 2000 m (6,561ft)
Non-operating altitude 15,000m (49,212 ft)
Operating humidity 80% room humidity for temperatures up to 31 °C, decreasing linearly to 40% at 50°C
Pollution degree 2

Note

Probe ID readout: compatible with Agilent's InfiniiVision and Infiniium series oscilloscopes

Supplied with

1 spring-loaded probe tip, 4 spare probe tips (2 spring-loaded and 2 rigid) and 5 different IC caps for IC lead pitches from 0.5mm to 1.27mm

Passive Oscilloscope Probes

Note

All the products in this range are supplied for use with instruments with a permanent earth connection.

Specifications
Attribute Value
Probe Type Passive
Attenuation 1:10
Bandwidth 200MHz
Connector Type BNC
Model Number p N2871A
Safety Category Level CAT I, CAT II
Safety Category Voltage 300 V, 400 V
Series N2870A
Safety Category CAT I 400 V, CAT II 300 V
1 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 1,511.68
units
Per unit
1 +
MYR1,511.68
Related Products
Solves three longstanding problems by providing: lower DUT ...
Description:
Solves three longstanding problems by providing: lower DUT loading (≤1 pF/1 MΩ probe loading); direct and easy access to SMDs; accesses DUT signals and scope bandwidth for TDS600/700/3000/5000/6000/7000*1 and CSA7000 scopes up to 1 GHz bandwidths. Provides the electrical and ...
The TPP1000 is a high-bandwidth, general-purpose probe that ...
Description:
The TPP1000 is a high-bandwidth, general-purpose probe that offers breakthrough specifications in its product class. The probe's exceptionally low capacitive loading limits adverse affects on circuits and is more forgiving of longer ground leads. And, with wide bandwidth, users can ...
Description:
The DXC200 is a pair of x1 probes matched for differential measurement applications. The DXC200 is designed to minimise capacitance loading (compared to coaxial cable) while still maintaining practical probe-to-circuit attachment. Full DA1800 series amplifier gain and Common Mode Rejection ...
The 190 Series ScopeMeters are the first two ...
Description:
The 190 Series ScopeMeters are the first two and four channel industrial portable oscilloscopes allowing measurements in harsh, hazardous and dirty environments with the highest CAT IV 600V safety rating. With these features the ScopeMeter 190 Series II can be ...