Tektronix TCPA300 Oscilloscope Probe Amplifier, For Use With TCPA300 AC/DC Measurement System

  • RS Stock No. 764-4391
  • Mfr. Part No. TCPA300
  • Manufacturer Tektronix
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): CN
Product Details

Tektronix TCPA300 Amplifier

The Tektronix TCPA300 amplifier is designed for use with the Tektronix TCP312 (30A) or TCP305 (50A) current probe. These probe/amplifier combinations offer a wide current measurement capability, from low-level milliamp measurements to high current levels. The TCPA300 can also be used with non-TEKPROBE systems to make proper current measurements, by multiplying the measured output voltage on the oscilloscope by the TCPA300 range setting.

Note

Requires Tektronix TCP305 ( 628-7534 ) or TCP312 ( 499-592 ) current probe, available separately.

Supplied with

Instruction/service manual, TEKPROBE interface cable, Male-to-Male BNC cable (50Ω), 50Ω feedthrough termination, Certificate of Traceable Calibration

Tektronix Oscilloscope Probe Amplifier

The Tektronix TCPA300 oscilloscope probe amplifier is a highly advanced current measurement system. When connected to Tektronix oscilloscopes with TEKPROBE Level II, TekConnect (w/ TCA-BNC) or TekVPI (w/TPA-BNC) interfaces offer a wide current measurement capability, from low-level milliamp measurements to high current levels. It can also be used with non-Tekprobe systems to make proper current measurements, by multiplying the measured output voltage on the oscilloscope by the TCPA300 range setting.
Note:
Requires Tektronix TCP305 ( 628-7534 ) or TCP312 ( 499-592 ) current probe, available separately.
Supplied with instruction/service manual, TEKPROBE interface cable, Male-to-Male BNC cable (50O), 50O feedthrough termination, Certificate of Traceable Calibration.

Features and Benefits

• DC to 100MHz: Current Probe Amplifier
• Automatic scaling and units 1 - Oscilloscope on-screen readout of magnitude and amps reduces measurement errors with no more hand calculations
• AC/DC input coupling
• Low insertion impedance reduces device under test loading
• Split-core construction allows easy circuit connection
• Status indicators provide visual operating status and notification of potential error conditions - degauss, probe open, overload, not terminated into 50ohm, no compatible probe type
• Lower DC drift and noise allow improved low level current measurements

Applications

• Development and analysis solutions for designers, installers, and service personnel in telecomm, data communication, computer and semiconductor power electronics environments for
• Power supplies (switching and linear)
• Semiconductor devices (SCRs, IGBTs, MOSFETs, CMOS, BJTs)
• Power inverters/converters
• Electronic ballasts
• Industrial/consumer electronics
• Mobile communications (phone, satellite and relay stations)
• Motor drives transportation systems (electronic vehicles, electric trains, locomotives and avionics)

Certifications

• UL3111-2-032 UL3111-1 certified
• EN61010-1/A2 certified
• IEC61010-1/A2 certified

Note

Requires Tektronix TCP305 ( 628-7534 ) or TCP312 ( 499-592 ) current probe, available separately.

Supplied with

Instruction/service manual, TEKPROBE interface cable, Male-to-Male BNC cable (50Ω), 50Ω feedthrough termination, Certificate of Traceable Calibration

Specifications
Attribute Value
Accessory Type Amplifier
For Use With TCPA300 AC/DC Measurement System
6 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 15,285.66
units
Per unit
1 +
MYR15,285.66
Related Products
Omron E3NX-CA series colour mark fibre amplifier units ...
Description:
Omron E3NX-CA series colour mark fibre amplifier units are advanced performance sensors for detection of subtle colour differences. The sensing distance and minimum sensing object specifications of the sensors have been improved allowing easy detection in a wide variety of ...
A 6.2 mm PLC interface relay module designed ...
Description:
A 6.2 mm PLC interface relay module designed to be mountable on DIN rail NS 35/7.5. Featuring a basic terminal block with screw connection and a plug-in miniature power relay. • Saves space on the DIN rail• Cost-effective• Use the ...
The Analogue Discovery 2 is a USB oscilloscope ...
Description:
The Analogue Discovery 2 is a USB oscilloscope and multi-function instrument that allows users to measure, generate, record and control mixed-signals of all kinds. The optional Discovery BNC Adapter Board provides standard BNC probe connections. Discovery 2 is aimed at ...
The Analogue Discovery 2 is a USB oscilloscope ...
Description:
The Analogue Discovery 2 is a USB oscilloscope and multi-function instrument that allows users to measure, generate, record and control mixed-signals of all kinds. The optional Discovery BNC Adapter Board provides standard BNC probe connections. Discovery 2 is aimed at ...