LM3900NE4 Texas Instruments, Norton, Op Amp, 2.5MHz, 5 → 28 V, 14-Pin PDIP

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Norton Operational Amplifiers

A range of Texas Instruments current-differencing (Norton) operational amplifiers which can be used in most conventional op-amp applications where the inputs are currents rather than voltages. Outputs are of the standard voltage source/sink type and the devices are ideally suited to high-speed applications such as video amplifiers, wide range waveform generators and high-Q high frequency filters.

Specifications
Attribute Value
Amplifier Type Norton
Mounting Type Through Hole
Package Type PDIP
Power Supply Type Dual, Single
Number of Channels per Chip 4
Pin Count 14
Typical Single Supply Voltage 5 → 28 V
Typical Gain Bandwidth Product 2.5MHz
Typical Dual Supply Voltage ±12 V, ±15 V, ±3 V, ±5 V, ±9 V
Typical Slew Rate 20V/µs
Maximum Operating Temperature +70 °C
Minimum Operating Temperature 0 °C
Typical Voltage Gain 69 dB
Width 6.35mm
Rail to Rail No
Length 19.3mm
Dimensions 19.3 x 6.35 x 4.57mm
Height 4.57mm
20 In Global stock for delivery within 4 - 6 working days
Price Each (In a Pack of 10)
MYR 1.469
units
Per unit
Per Pack*
10 - 10
MYR1.469
MYR14.69
20 - 40
MYR1.454
MYR14.54
50 - 90
MYR1.452
MYR14.52
100 - 190
MYR1.195
MYR11.95
200 +
MYR1.181
MYR11.81
*price indicative
Due to temporarily constrained supply, RS is unable to accept backorders at this time
Packaging Options:
Related Products
A range of general purpose operational amplifiers from ...
Description:
A range of general purpose operational amplifiers from Texas Instruments suitable for a multitude of uses. These devices offer cost-effective performance in non-specialised applications and are available in single, dual and quad configurations. The range includes a large variety of ...
Power operational amplifiers from Texas Instruments with high ...
Description:
Power operational amplifiers from Texas Instruments with high current outputs suitable for driving low impedance and difficult loads. Many of these devices are capable of operating at higher supply voltages than general purpose op amps. Typical applications include driving MOSFETs ...
Power operational amplifiers from Texas Instruments with high ...
Description:
Power operational amplifiers from Texas Instruments with high current outputs suitable for driving low impedance and difficult loads. Many of these devices are capable of operating at higher supply voltages than general purpose op amps. Typical applications include driving MOSFETs ...
The Texas Instruments TL050 series is an enhanced ...
Description:
The Texas Instruments TL050 series is an enhanced JFET-input Op Amp family that offers lower offset voltage and improved dc and ac characteristics over its predecessors, the TL070 & TL080 families. The low power TL030 series offers similar improvements over ...