ISL28130FHZ-T7A Intersil, Precision, Op Amp, RRIO, 400kHz 1 MHz, 5-Pin SOT-23

RS Stock No.:: 170-8076
Mfr. Part No.:: ISL28130FHZ-T7A
Manufacturer:: Intersil

ISL28130FHZ-T7A Intersil, Precision, Op Amp, RRIO, 400kHz 1 MHz, 5-Pin SOT-23

This image is representative of the product range

View all Op Amps

Discontinued product

RS Stock No.:: 170-8076
Mfr. Part No.:: ISL28130FHZ-T7A
Manufacturer:: Intersil

Technical data sheets

Legislation and Compliance

COO (Country of Origin):: MY

Product Details

ISL28130, ISL28133, Single Micropower, Low Drift or Chopper Stabilised, Rail-to-Rail I/O Operational Amplifiers, Intersil

ISL28130 (Low Drift)

Low input offset voltage: 40 μV, Max.
Low offset drift: 150 nV/°C, Max.
Input bias current: 250 pA, Max.
Quiescent current: 20 μA, Typical per amplifier
Single supply range: +1.8 V to +5.5 V

ISL28133 (Chopper Stabilised)

Low input offset voltage: 8 μV, Max.
Low offset TC: 0.075 μV/°C, Max.
Input bias current: 300 pA, Max.
Quiescent current: 18 μA, Typical
Wide supply range: 1.8 V to 5.5 V

Operational Amplifiers, Intersil

Intersil Operational Amplifiers are among high-performance amplifier ICs in the industry.

Specifications

Attribute	Value
Amplifier Type	Precision
Mounting Type	Surface Mount
Package Type	SOT-23
Power Supply Type	Dual, Single
Number of Channels per Chip	1
Pin Count	5
Typical Gain Bandwidth Product	400kHz
Typical Slew Rate	0.1 (Negative) V/μs, 0.2 (Positive) V/μs
Maximum Operating Frequency	1 MHz
Maximum Operating Temperature	+125 °C
Minimum Operating Temperature	-40 °C
Output Current	15 mA
Offset Voltage	±55µV
Maximum Input Voltage	±2.75 V
Rail to Rail	Rail to Rail Input/Output
Typical Voltage Gain	150 dB
Height	1.14mm
Width	1.6mm
Input Voltage Range	±0.9 → ±2.75 V
Length	2.9mm
Dimensions	2.9 x 1.6 x 1.14mm
Minimum Input Voltage	±0.9 V
Typical Input Voltage Noise Density	65nV/√Hz
Input Offset Current	-60pA