BA4560RF-E2 ROHM, Low Noise, Op Amp, 10MHz 10 kHz, 8-Pin SOP
- RS Stock No.:
- 168-1882
- Mfr. Part No.:
- BA4560RF-E2
- Manufacturer:
- ROHM
1625 In Global stock for delivery in 4-6 working days, delivery time may vary for certain locations or FTZ
Added
Price Each (In a Pack of 25)
MYR2.869
| Units | Per Unit | Per Pack* |
| 25 - 25 | MYR2.869 | MYR71.725 |
| 50 - 225 | MYR2.73 | MYR68.25 |
| 250 - 475 | MYR2.467 | MYR61.675 |
| 500 - 975 | MYR2.221 | MYR55.525 |
| 1000 + | MYR2.001 | MYR50.025 |
| *price indicative | ||
- RS Stock No.:
- 168-1882
- Mfr. Part No.:
- BA4560RF-E2
- Manufacturer:
- ROHM
Technical data sheets
Legislation and Compliance
Product Details
General-purpose BA4558 / BA4560 / BA15218 / BA14741 / BA15532 / BA4510 family and high-reliability BA4558R / BA4560R / BA4564R / BA4580R / BA4584 / BA4584R / BA8522R / BA2115 family integrate two or four independent Op-Amps on a single chip Especially, this series is suitable for any audio applications due to low noise and low distortion characteristics and are usable for other many applications by wide operating supply voltage range. BA4558R / BA4560R / BA4564R / BA4580R / BA4584R / BA8522R / BA2115 are high-reliability products with extended operating temperature range and high ESD tolerance.
High voltage gain, low noise, low distortion
Wide operating supply voltage
Internal phase compensation
No latch up immunity
Internal ESD protection
Human body mode (HBM) ±5000[V](Typ.)
Wide temperature range
Wide operating supply voltage
Internal phase compensation
No latch up immunity
Internal ESD protection
Human body mode (HBM) ±5000[V](Typ.)
Wide temperature range
For products that are Customized and under Non-cancellable & Non-returnable, Sales & Conditions apply.
Specifications
Attribute | Value |
|---|---|
| Amplifier Type | Low Noise |
| Mounting Type | Surface Mount |
| Package Type | SOP |
| Power Supply Type | Dual |
| Number of Channels per Chip | 2 |
| Pin Count | 8 |
| Typical Gain Bandwidth Product | 10MHz |
| Output Type | Swing |
| Typical Dual Supply Voltage | 3V |
| Typical Slew Rate | 4V/µs |
| Maximum Operating Frequency | 10 kHz |
| Minimum Operating Temperature | -40 °C |
| Maximum Operating Temperature | +105 °C |
| Typical Voltage Gain | 100 dB |
| Offset Voltage | 7mV |
| Maximum Input Voltage | ±15 V |
| Typical Input Voltage Noise Density | 8nV/√Hz |
| Minimum Input Voltage | ±4 V |
| Dimensions | 5 x 4.4 x 1.39mm |
| Input Offset Current | 200nA |
| Length | 5mm |
| Input Voltage Range | ±4 → ±15 V |
| Width | 4.4mm |
| Height | 1.39mm |