DC/DC Converter Non-Isolated 0.7-1.8V 6A

  • RS Stock No. 135-8879
  • Mfr. Part No. MYMGK1R806FRSR
  • Manufacturer Murata
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Murata Mono Block 6A DC-DC Converter

The MYMGK***06 series are miniature Mono Block type non-isolated Point-of-Load (PoL) DC-DC power converters for embedded applications. The tiny form factor measures only 9.0 x 7.5 x 5.0 mm. Applications include powering FPGA/CPU’s, Datacom/telecom systems, Distributed Bus Architectures (DBA), programmable logic and mixed voltage systems. The converters have input voltage ranges of 4.5 to 5.5 V dc(*FRSR) or 8.0 to 14 V dc(*ERSR) and a maximum output current of 6 Amps. Based on a fixed frequency synchronous buck converter switching topology, this high power conversion efficient PoL module features programmable output voltage 0.7to1.8 V dc(*FRSR) or 0.7 to 5.0 V dc(*ERSR), On/Off control and Power Good signal output. These converters also include under voltage lock out (UVLO), output short circuit protection and over-current protection.

Features and Benefits

• Programmable output voltage from 0.7-1.8 V dc
• Up to 6 Amps of output current
• Quick response to load change
• Ultra-small surface mount package
• 9.0 x 7.5 x 5.0 mm
• Outstanding thermal derating performance
• Overcurrent protection
• On/Off control (Positive logic)
• Power Good signal
• RoHS-6 hazardous substance compliance
• High Reliability / Heat Shock Testing
• 700 cycle (-40 to +125 °C)

Specifications
Attribute Value
Input Voltage Range 4.5 → 5.5 V dc
Input Voltage Nominal 5 V dc
Mounting Type Surface Mount
Number of Outputs 1
Efficiency 90%
Minimum Temperature -40°C
Maximum Temperature +85°C
Maximum Input Current 2.4 (Full Load) A, 13 (No Load) mA
Ripple And Noise 0.7mV Pk-Pk
Standards Met CSA-C22.2 No. 60950-1, EN 60950, IEC, IEC/EN 60950-1, UL, UL 60950-1
Power Signal Conversion Type DC-DC
Series MGK
MTBF 3900000h
Protection Features Current Limit, Over Voltage Protection, Short Circuit Protection, Under Voltage Protection
Weight 1.2g
Discontinued product
Related Products
Very high efficiencyWide input voltage rangeNon-isolatedUser-selectable output voltages ...
Description:
Very high efficiencyWide input voltage rangeNon-isolatedUser-selectable output voltages via external resistorsPhased start-up for sequencing and trackingStarts up into pre-biased loadRemote On/Off controlRemote senseLow output noise and rippleUnder voltage lockout, over temperature and continuous short circuit ...
Non-isolatedDOSA industry standard package & pin out (SIP)Wide ...
Description:
Non-isolatedDOSA industry standard package & pin out (SIP)Wide input voltage rangeUp to 10A output currentAdjustable output voltage via external resistorsRemote On/Off ControlRemote senseLow output noise and rippleUnder-voltage lockout, over-current and over-temperature protection.
12V or 24V input voltagePositive or negative optionsNon-isolatedBuffered ...
Description:
12V or 24V input voltagePositive or negative optionsNon-isolatedBuffered output voltage & current monitorsInternal precision referenceRemote output programmingDemonstrated MTBF >1 million hoursChassis mounting style with input connectors and fly lead outputInput protected against reverse polarity, output short ...
Non-isolatedPOLA (Point-of-Load Alliance product)Wide input voltage rangeUp to ...
Description:
Non-isolatedPOLA (Point-of-Load Alliance product)Wide input voltage rangeUp to 10A output currentAdjustable output voltage via external resistorsAuto-track™ sequencingMargin up/down controlsPre-bias start-up capabilityOutput ON/OFF inhibitOutput voltage senseUnder-voltage lockout and short current ...