3 + N Pole Panel Mount Non Fused Isolator Switch, NO, 25 A, 11 kW, IP65

  • RS Stock No. 805-5578
  • Mfr. Part No. P1-25/M4/N/SVB-SW
  • Manufacturer Eaton
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

P1 Series Isolators With Metal Extension Shafts

The Eaton P1 series of switch-disconnectors with metal extension shafts are compact and robust, ideal for hard-wearing industrial environments, with a rated uninterrupted current of up to 32 Amps.

Features and Benefits

• Featuring extension shafts, the Eaton P1 switches can be mounted in electrical cabinets of up to 600mm deep, and offer a solution in many different applications due to the variety of handle and shaft options available.
• The Eaton P1 range of switch-disconnectors offers high performance and reliability paired with low power losses.
• Performs local isolation, manual override & safety switch functions.
• Switch-disconnectors have rated uninterrupted current from 13 - 32 A.
• Shaft is metal to increase the robustness and durability of devices.

Uses and Applications

This range of isolator switches from Eaton is suitable for use in applications where there is a need to disconnect electrical equipment from the circuit. This form of local isolation is most commonly needed for the repair and maintenance of electrical equipment on the de-energised circuit. These disconnect switches can also be used as safety switches. Potential use in machine control panels.

Attribute Value
Number of Poles 3 + N
Maximum Current 25 A
Mounting Type Panel Mount
Normal State Configuration NO
Power Rating 11 kW
IP Rating IP65
Accepts Padlocks Yes
Voltage Rating 690 V ac
Switch Rating 150 A
Minimum Operating Temperature -25°C
Throw Configuration Single
Terminal Type Screw
Handle Colour Black
Maximum Operating Temperature +40 (Enclosed) °C, +50 (Open) °C
Temporarily out of stock - back order for despatch 28/01/2020, delivery within 4 working days from despatch date
Price Each
MYR 239.25
Per unit
1 +
Related Products
All CBEs have blade terminals and have an ...
All CBEs have blade terminals and have an insulation resistance greater than 100MΩ (MegaOhms). 1-pole magnetic hydraulic CBE with trip free snap action mechanism with toggle actuation.Industry standard dimensions with medium delay for most applications.Typically used on control equipment, communication ...
Switch disconnectors are used to isolate electrical equipment ...
Switch disconnectors are used to isolate electrical equipment before any essential maintenance or repair work can be completed. Switch disconnectors ensure electrical circuits are de-energized safely in accordance with the electricity at work regulations. Engineers and electricians are then able ...
Craig & Derricott i-switch range of slopped roof ...
Craig & Derricott i-switch range of slopped roof stainless steel switch disconnectors specially suited for hygienic environments. The design has been created to minimise areas where dirt can accumulate and incorporates a flush rear surface and universal fixing that include ...
3 Pole, 25A, with 1N0 & 1NC auxiliary ...
3 Pole, 25A, with 1N0 & 1NC auxiliary contacts, enclosed Isolator.C/W Safety Switch warning label.Lockable in Off Position.