3 Pole Panel Mount Non Fused Isolator Switch, NO, 25 A, 11 kW, IP65

  • RS Stock No. 805-5569
  • Mfr. Part No. P1-25/M4/K1-PR
  • Manufacturer Eaton
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

P1 Series Isolators With Metal Extension Shafts 13 - 32 Amp

The P1 series of switch-disconnectors with metal extension shafts are compact and robust ideal for hard wearing industrial environments with a rated uninterrupted current of up to 32 Amps. This range of isolator switch from Eaton is suitable for use in applications where there is a need to disconnect electrical equipment from the circuit. The need for this form of local isolation is most commonly needed for repair and maintenance of the electrical equipment on the de-energised circuit. These disconnect switches can also be used as safety switches.

Preforms local isolation, manual override & safety switch functions
Rated uninterrupted current from 13 - 32 A
Shaft is metal to increase robustness and durability

Specifications
Attribute Value
Number of Poles 3
Maximum Current 25 A
Mounting Type Panel Mount
Normal State Configuration NO
Power Rating 11 kW
IP Rating IP65
Accepts Padlocks Yes
Voltage Rating 690 V ac
Switch Rating 150 A
Minimum Operating Temperature -25°C
Maximum Operating Temperature +40 (Enclosed) °C, +50 (Open) °C
Handle Colour Red
Terminal Type Screw
Throw Configuration Single
2 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 294.43
units
Per unit
1 +
MYR294.43
Related Products
The switch fuses from the ABB OS series ...
Description:
The switch fuses from the ABB OS series are available in 3 or 4 pole. These fused switches are easy to use and snap to install, the adjustable mounting feet allow both top and side mounting of the switch fuse. ...
The fuserbloc series are manually operated multi polar ...
Description:
The fuserbloc series are manually operated multi polar fuse combination switches. These fused switch disconnectors break or switch off on load and provide safety isolation and protection against over current for any low voltage electrical circuit. The fuserbloc series is ...
Padlockable in OFF position, up to 3 padlocks ...
Description:
Padlockable in OFF position, up to 3 padlocks and non-locking versionsIngress protection to IP652 and 3 pole versions have built in neutral and earth connections3 pole switches ('P' type only) accept add-on switched neutral and auxiliary contacts (except 20A switches) ...
Main and emergency stop switchHandle in Black or ...
Description:
Main and emergency stop switchHandle in Black or Red/Yellow(emergency stop)Front plate 48 x 48 mmFour hole or central hole fixingAccepts 3 padlocksFront panel seal IP65.