3 + N Pole Panel Mount Switch Disconnector, 3NO, 63 A, 37 kW, IP65

  • RS Stock No. 103-8406
  • Mfr. Part No. P3-63/EA/SVB/N
  • Manufacturer Eaton
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

Eaton Non-Fused Isolator Switch - P3-63/EA/SVB/N

Eaton's isolator switch can sometimes be referred to as a switch disconnector, this is because it has been created and designed to safely isolate a circuit whilst it is being used or maintained. This isolator switch breaks or isolates a circuit through the rotation of the rotary handle and locking ring. This type of non-fused isolator switch will be found isolating circuit breakers, transmission lines, transformers and a multitude of other applications.

Features & Benefits

• The perfect solution for installing as a safety measure
• Used as an emergency switching off/emergency stop device
• The basic functions are when used as a main switch, maintenance switch or manual override switch
• Red rotary handle and yellow locking ring, providing an aesthetically pleasing finish
• 3 pole + N
• Main functions are as a main switch, maintenance switch and repair switch
• Lockable in the 0/OFF position, with up to three padlocks
• Flush mounting
• IP65 rating - this means that the enclosure part of the isolator has ingress protection against dust and is also protected against low-pressure jets of water that comes from all directions
• Features an ambient operating temperature of -25 to +50 °C
• Has a mechanical shock resistance of 15g
• M5 screw terminal
• Number of switches -1

What is the difference between a fused switch disconnector and a non-fused switch disconnector?

Unlike fused switch disconnectors, a non-fuse isolator switch does not use a fuse to break or put a circuit into isolation, they instead use a rotary to disconnect or isolate a circuit.

Specifications
Attribute Value
Number of Poles 3 + N
Maximum Current 63 A
Mounting Type Flush Mount
Series P3-63
Normal State Configuration 3NO
Power Rating 37 kW
IP Rating IP65
Accepts Padlocks Yes
Voltage Rating 690 V
Electrical Phase 1, 3
Switch Rating 640 A
Length 87mm
Width 101mm
Depth 114mm
Minimum Operating Temperature -25°C
Handle Colour Red
Throw Configuration Single
Terminal Type Screw
Maximum Operating Temperature +50°C
27 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 468.91
units
Per unit
1 +
MYR468.91
Related Products
Padlockable in OFF position, up to 3 padlocks ...
Description:
Padlockable in OFF position, up to 3 padlocks and non-locking versionsIngress protection to IP652 and 3 pole versions have built in neutral and earth connections3 pole switches ('P' type only) accept add-on switched neutral and auxiliary contacts (except 20A switches) ...
RS Pro high quality range of enclosed door ...
Description:
RS Pro high quality range of enclosed door interlocked fuesd switches for use with low voltage switchgear such as power distribution, load isolation and motor start/stop. The RS Pro range comes in 32A, 63A and 80A versions and features 3 ...
All have a nominal voltage of 690V. The ...
Description:
All have a nominal voltage of 690V. The stated motor rating utilisation category AC23A/AC3 is for 3 phase 380/440V supply. Padlockable (x4) in "OFF" positionFingerproof main terminals on 20A to 63A switchesTerminal shrouds supplied with 80A to 250A switches.
Main and emergency stop switchHandle available in black ...
Description:
Main and emergency stop switchHandle available in black or red/yellow (emergency stop)Accepts 3 padlocksFront panel seal IP65Side feed with coverScrew or DIN rail assembly.