6 Pole Panel Mount Non Fused Isolator Switch, NO/NC, 20 A, 6.5 kW, IP55

  • RS Stock No. 764-962
  • Mfr. Part No. T0-4-15682/S/SVB-SOND
  • Manufacturer Eaton
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

Switch Disconnectors with Auxiliary Contacts

For use on single-speed single direction motors
Sheet steel enclosures, ingress protection to IP65
Supplied with 1 x N/O and 1 x N/C auxiliary contact (20A 3 pole one N/O contact only)
Lockable in off position with up to three padlocks
Cover interlocked in the ON position

Note

Switch power/capacity refers to AC23A use at 380-440V. Accessories shown in this module only suitable for use with P series switch disconnectors.

Standards

BS EN60947 and VDE 0113

Warning

  • Because of the heating effect in compact enclosures, the 100A versions should be downrated to 85A when in continuous operation.
    Auxiliary contact 333-546 should not be used with switches above 100A operating current.
Specifications
Attribute Value
Number of Poles 6
Maximum Current 20 A
Mounting Type Panel Mount
Normal State Configuration NO/NC
Power Rating 6.5 kW
IP Rating IP55
Accepts Padlocks Yes
Voltage Rating 415 V ac
Switch Rating 320 A
Length 174mm
Width 104mm
Depth 134mm
Minimum Operating Temperature -25°C
Maximum Operating Temperature +40°C
Handle Colour Red/Yellow
Throw Configuration Single
Terminal Type Screw
4 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 592.99
units
Per unit
1 +
MYR592.99
Related Products
Eaton's panel mount isolator switch can sometimes be ...
Description:
Eaton's panel mount isolator switch can sometimes be referred to as a switch disconnector, this is because it has been created and designed to safely isolate a circuit whilst it is being used or maintained. This isolator switch breaks or ...
Switch disconnectors are used to isolate electrical equipment ...
Description:
Switch disconnectors are used to isolate electrical equipment before any essential maintenance or repair work can be completed. Switch disconnectors ensure electrical circuits are de-energized safely in accordance with the electricity at work regulations. Engineers and electricians are then able ...
Adaptable with simple attachment of auxiliary contact, neutral ...
Description:
Adaptable with simple attachment of auxiliary contact, neutral pole, or up to 3 main poles to basic 3-pole switchSuitable for main/emergency switching 690V nominal voltageIngress protection IP55Full compliance with BS/EN 60947-3Supplied as complete kit in one pack.
All have a nominal voltage of 690V. The ...
Description:
All have a nominal voltage of 690V. The stated motor rating utilisation category AC23A/AC3 is for 3 phase 380/440V supply. Padlockable (x4) in "OFF" positionFingerproof main terminals on 20A to 63A switchesTerminal shrouds supplied with 80A to 250A switches.