Weidmuller, SAK Series , 800 V Feed Through Terminal Block, Screw Down Termination

  • RS Stock No. 425-594
  • Mfr. Part No. 0279660000
  • Manufacturer Weidmuller
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Standard Terminals, End Covers, and Jumper Bars

Standard or feed through rated at 750V . Terminals of the same type may be cross connected using the pre-assembled jumper bars for up to 10 poles (2.5mm-16mm terminals) and 2 poles (35mm terminals).,TSCH partitions fit jumper bar cut outs.

Note

TSCH small partitions fit SAK 2.5, 5, 6N, 10 and 16 standard terminals.,Stock No.s 425-639 and 425-645 do not have DEMKO Approval

Approvals

CSA certified, UL listed, NEMKO, SEV, KEMA, DEMKO

Approvals

1, 2, 4 -7

SAK Series

Terminals manufactured from polymide 6.6 with a working temperature of -50°C to +100°C except the fused terminal block (425-689) which is high grade melamine with a working temperature of -60°C to +130°C. Asymmetric rail (G-profile) to B 5825:1980 EN 50035 mounting

Specifications
Attribute Value
Series SAK
Wire Size 26 → 10 AWG
Cable CSA 2.5mm²
Colour Brown
Current Rating 41A
Number of Levels Single
Termination Method Screw Down
Voltage Rating 800 V
Minimum Operating Temperature -50°C
Maximum Operating Temperature +100°C
2380 In Global stock for delivery within 4 - 6 working days
Price Each (In a Pack of 10)
MYR 10.015
units
Per unit
Per Pack*
10 +
MYR10.015
MYR100.15
*price indicative
Related Products
Standard series, mounting dimensions per DIN 69 051, ...
Description:
Standard series, mounting dimensions per DIN 69 051, Part 5 Flange type C. Standard sealsWith backlash, reduced backlash, preload 2%; 3%; 5%For precision rolled screws SN-R of tolerance grade T5, T7, T9.
Floating bearing with deep-groove ball bearing per DIN ...
Description:
Floating bearing with deep-groove ball bearing per DIN 625. Precision pillow block unit housing made of steel with reference edge on one sideDeep-groove ball bearing per DIN 625-…2RSRetaining ring per DIN 471CoverAll parts are supplied unmounted.
Clamp shaft collars do not mar the shaft, ...
Description:
Clamp shaft collars do not mar the shaft, are easy to remove and are indefinitely adjustable. They are commonly used for guiding, spacing, stopping, mounting and component alignment. Equipment manufacturers benefit from the tightly controlled face to bore perpendicularity of ...
A range of zinc plated steel shaft collars ...
Description:
A range of zinc plated steel shaft collars for positioning power transmission components such as bearings, sprockets and pulleys to shafts. Supplied with setscrew. Zinc plated for corrosion resistanceQuick and easy installationMetric bore sizes.