- RS Stock No.:
- 880-1826
- Mfr. Part No.:
- RSS260-D-ST
- Manufacturer:
- Schmersal
Available for back order.
Added
Price Each
MYR839.56
Units | Per Unit |
1 + | MYR839.56 |
Alternatives
This product is not currently available. Here are our alternative recommendations.
- RS Stock No.:
- 880-1826
- Mfr. Part No.:
- RSS260-D-ST
- Manufacturer:
- Schmersal
Legislation and Compliance
- COO (Country of Origin):
- DE
Product Details
Schmersal RFID Non-Contact Safety Switch, M8, 600mA - RSS 260 Series - RSS260-D-ST
Use this non-contact safety switch from Schmersal to improve workplace safety in industrial environments. It has a coded actuator and uses radio frequency identification (RFID) technology to prevent tampering with the switch. It triggers an alarm when swivel doors are opened during operation, alerting you to a potential hazard.
This component can be connected with up to 31 sensors in series for easy diagnosis via a programmable logic controller (PLC), so you can monitor and configure multiple switches at the same time. It has a thermoplastic housing that offers excellent durability and corrosion resistance, making it suitable for use in demanding industrial environments.
This component can be connected with up to 31 sensors in series for easy diagnosis via a programmable logic controller (PLC), so you can monitor and configure multiple switches at the same time. It has a thermoplastic housing that offers excellent durability and corrosion resistance, making it suitable for use in demanding industrial environments.
Features & Benefits
• IP67 (ingress protection) rating indicates the unit can withstand dust and immersion in up to 1m of water for 30 minutes
• Meets IEC/EN 60947-5-3 (International Electrotechnical Commission/European Norm) electrical safety standards
• Surge voltage capacity of 0.8kV to efficiently handle voltage spikes
• Broad operating temperature range of -25°C to +65°C for use in harsh environments
• Meets IEC/EN 60947-5-3 (International Electrotechnical Commission/European Norm) electrical safety standards
• Surge voltage capacity of 0.8kV to efficiently handle voltage spikes
• Broad operating temperature range of -25°C to +65°C for use in harsh environments
Applications
• Access points to hazardous industrial areas
• Chemical processing plants
• Chemical processing plants
How do I identify the device's switching status?
This safety switch has three light-emitting diode (LED) indicators for easy status identification. Green indicates that there's a supply voltage, red shows an error and yellow means it's sensing.
Specifications
Attribute | Value |
---|---|
Supply Voltage | 20.4 → 26.4V dc |
Housing Material | Plastic |
Connection Type | M8 |
Actuator Type | Coded |
Safety Category | 3 |
Sensor Principle | RFID |
Actuator Included | Yes |
Series | RSS 260 |
Switching Distance | 6 (Lateral Sao ON) mm, 9 (Lateral Sn) mm, 10 (Front Sao ON) mm, 12 (Front Sn) mm, 15 (Lateral Sar OFF) mm, 18 (Front Sar OFF) mm |
IP Rating | IP65, IP67 |
Supply Current | 600mA |
Standards Met | BG-GS-ET-14, CE Listed, cULus Listed, EN 60079-0, EN 60079-15, EN 60079-31, EN ISO 13849-1, IEC 60947-5-3, TUV |
Width | 29.5mm |
Number of Approach Directions | 2 |
Depth | 18mm |
Length | 39.2mm |