F3S-TGR-N_X Magnetic Safety Switch, Stainless Steel, 24 V dc

  • RS Stock No. 820-3866
  • Mfr. Part No. F3S-TGR-NLMX-21-10
  • Manufacturer Omron
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

F3S-TGR Explosion Proof Non Contact Switch

The Omron F3S-TGR-N_X non-contact switch is designed to monitor the status of guard doors or the position of linear systems in explosive environments. The design includes wear-free non-contact operation for extended operation time and a robust mechanical setup to cover mechanical tolerances and vibrations.

Explosion proof
Connect up to 6 switches in series
Operates behind stainless steel fittings
Suitable for high pressure cleaning, CIP and SIP processes
IP69K protection (pre-wired types)
Conforms to safety categories up to PLe acc. EN ISO 13849-1
II 2G Ex mb IIC T6Gb, II 2D Ex mb IIC T80 Db IP67 (Product is fully encapsulated which is considered to provide Ingress Protection to at least IP67)
Zone 1 Gas, Zone 21 Dust, Zone 2 Gas, Zone 21 Dust (An area where Gas and Dust is likely to occur in use)
IEC/EN 60079-0, IEC/EN 60079-18

Note

For suitable controller see the G9SA or G9SB from Omron, or the NE1A DeviceNet system.

Standards

EN standards certified by TÜV Rheinland, EN 954-1, EN ISO 13849-1, EN 60204-1, EN/IEC 60947-5-3, UL 508, CSA C22.2, BS 5304, EN 1088-1.

Approvals

IEC, IECEx, ATEX.

Supplied with

Actuator.

Specifications
Attribute Value
Supply Voltage 24 V dc
Safety Contacts 2NC/NO
Housing Material Stainless Steel
Connection Type Cable
Switch Type Rectangular
Terminal Type 10m cable
Series F3S-TGR-N_X
Switching Distance 10 mm
IP Rating IP69K
Actuator Included Yes
Housing Colour White
Number of Approach Directions 6
Safety Category 4
Sensor Principle Magnetic
Actuator Type Magnetic
2 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 1,903.70
units
Per unit
1 +
MYR1,903.70
Related Products
The F3S-TGR non contact safety switches are designed ...
Description:
The F3S-TGR non contact safety switches are designed to interlock hinge, sliding or removable guard doors. Plastic and stainless steel switches are available, the latter are ideally suited to high hygiene demands in the food industry. The switches have a ...
The Omron F3S-TGR-N_C series non-contact switch has a ...
Description:
The Omron F3S-TGR-N_C series non-contact switch has a switching distance of 22mm and 24VDC supply voltage. This is a small sensor type with 5m pre-wired cable connection. It has 2 normally closed contacts and 1 normally open contact. This switch ...
The Schmersal BNS260 series non-contact safety switch has ...
Description:
The Schmersal BNS260 series non-contact safety switch has a safe switch ON distance of 5mm and switch OFF distance of 15mm. This switch has 2NC contacts and an actuation magnet. It has a black thermoplastic enclosure and can be concealed ...
The Schmersal BNS33 safety sensor has a safe ...
Description:
The Schmersal BNS33 safety sensor has a safe switch ON distance of 5mm and switch OFF distance of 15mm. This switch has 1NO and 2NC contact. It has a black thermoplastic enclosure and can be concealed mounted as well.Note: The ...