Amprobe Network Cable Tester Cable Tester BNC, RJ45, LAN-1

  • RS Stock No. 668-0841
  • Mfr. Part No. LAN-1
  • Manufacturer Amprobe
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): TW
Product Details

LAN-1 LAN cable tester

Amprobe LAN-1 Cable Tester is designed to work with various data cables and connectors. This cable tester provides a quick go/no-go LED display of the wiring and connection of item under test.

Features and Benefits:

• Loopback test or remote test
• Buzzer sound for errors in the cable
• 300m maximum line length
• Approx. 20 hour battery life
• 2 sets of LED, signal and test

Frequently asked questions:

Tests pin configuration for 10/100 base –T, 10 base-2, RJ45 modular, AT&T 258A, EIA / TIA 568A/568B cables and Token Ring cables
Checks for continuity, interruptions, short circuits or incorrect connections
Tests installed cables or the patch panels by using the remote termination module
Performs loopback or remote tests
Buzzer sound warning for error condition
Two sets of LED lights for signal and test indication
Maximum cable length: >300 metres
Connectors: RJ45, BNC

What is a LAN cable tester?

LAN testers are devices that allow a user to verify and test a connection or signal within a data cable. The types of tests include whether the cable is set up correctly, connected, the strength or speed of the signal being sent through the cable.

How do network cable testers work?

Usually made up of 2 sections or 2 boxes, a network cable tester will have a receiver and a transmitter. A cable is then connected directly or with connectors to both for testing. Once the tester is switched on a signal or data is sent via the cable and a report or the results are shown on the receiver. Receivers comes in a variety of types, shapes and sizes and therefore the results may vary in the way they are displayed. Some have LED's, some show patterns in lights and some different colours. The tester instruction manual will show what the results mean but some testers help determine the connection speed and detect problems.

What is the difference between RJ45 & RJ11?

RJ45 is an 8-pin connector whereas RJ11 is only a 4 wire connector. RJ45 is used in Ethernet connections to connect computers to networks. RJ11 is more of a conventional telephone wire used to bring fibre into your house. RJ is the abbreviation of ’registered jack’.

Supplied with

Each unit is equipped with 3 RJ45/BNC adapter cables, a male/female BNC connector, 9 V battery and user manual.

Specifications
Attribute Value
Equipment Type Cable Tester
Connector Type BNC, RJ45
Tone Yes
Power Source Battery
Battery Type 9V
Battery Life 20 h
Dimensions 130 x 56 x 38mm
Weight 1.3kg
Height 38mm
Length 130mm
Maximum Operating Temperature +40°C
Minimum Operating Temperature 0°C
Model Number p LAN-1
Width 56mm
84 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 592.15
units
Per unit
1 +
MYR592.15
Related Products
Wide frequency responseNautilus casing-high impact resistance, waterproof and ...
Description:
Wide frequency responseNautilus casing-high impact resistance, waterproof and proof tested to IP67 Micro processor controlledKey press timing, Confirmation tonesBattery low warning and auto shut-offHeadset connection, Sealed electronicsSealed battery (PP3 9V not included)Large speakerWrist wrap, One button ...
The Teledyne LeCroy Mercury T2C adds USB Type-C ...
Description:
The Teledyne LeCroy Mercury T2C adds USB Type-C and Power Delivery 2.0 and 3.0 support to the industry's smallest and most affordable hardware-based USB 2.0 protocol analyser. The Mercury T2C combines the de-facto standard CATC Trace display, USB class decoding ...
The Mercury T2 is the industry's smallest, most ...
Description:
The Mercury T2 is the industry's smallest, most affordable hardware-based USB 2.0 protocol analyser that combines the defacto standard CATC Trace display with powerful analysis features. The pocket-sized Mercury T2 is bus powered and is controlled using any Windows PC. ...
Teledyne LeCroy’s Advisor T3 is an ultra portable ...
Description:
Teledyne LeCroy’s Advisor T3 is an ultra portable SuperSpeed USB analyser that delivers market leading accuracy at an extraordinary price. Designed to put precision USB protocol test tools in the hands of every engineer, the Advisor includes all the essential ...