Fluke FOM Fibre Optic Meter

  • RS Stock No. 240-9487
  • Mfr. Part No. FOM
  • Manufacturer Fluke
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): US
Product Details

Fluke Fibre Optic Meter and Light Source

The fibre optic meter (FOM) is a digital multimeter accessory that allows fibre optic cable installation and maintenance technicians to verify system performance.
The FOM is compatible with digital multimeters that have an mV d.c. function and a minimum 10MΩ input impedance.

The FOS850-1300 fibre optic light source (FOS), available separately, is a switch selectable dual infra-red LED light source to simulate medium and high data transfer rates

Single and duplex cable power loss
Transmitted power
Received power
Fibre optic cable continuity

Used with a light source the FOM can perform many tests on multimode fibre optic cable systems including:

Specifications
Attribute Value
Accessory Type Fibre Optic Meter
For Use With 10 Series, 11 Series, 12 Series, 12B Series, 20 Series, 22x Series, 27 Seri, 110 Series, 111 Series, 112 Series, 114 Series, 115 Series, 116 Series, 117 Series, 120 Series, 175 Series, 177 Series, 179 Series, 187 Series, 189 Series, 190 Series, 233 Series
Model Number p FOM
Discontinued product
Related Products
Universal temperature adaptor utilizing a P-N semiconductor junction ...
Description:
Universal temperature adaptor utilizing a P-N semiconductor junction as the sensing element. The adaptor can be plugged into any standard multimeter with input impedence of 1MΩ or greater to provide direct temperature measurement up to 150°C. Powered by PP3 battery ...
U1180A thermocouple adapter and lead set compatible with ...
Description:
U1180A thermocouple adapter and lead set compatible with the U1240A & U1250A series multimeters. T/C Bead - J Type: Temperature rating (wire) -20°C - 200°CT/C Bead - K Type: Temperature rating (wire) -20°C - 200°CIncludes a J/K type thermocouple adapter, ...
Plugs into any standard digital multimeter and operating ...
Description:
Plugs into any standard digital multimeter and operating through Type K thermocouple probes, converts it to a digital thermometer. Powered by PP3 battery (supplied)Measures in °C and °FMinimal stabilisation time needed as with thermocouple probesUnshrounded plugs.
Sensor module for measuring hydraulic and pneumatic pressure ...
Description:
Sensor module for measuring hydraulic and pneumatic pressure / vacuum up to 500 psi / 3447 kPa. For use with standard multimeters with an mVDC rating (≥10 mΩ, connection using 4 mm male banana plugs, 20 mm centres).Functions: min./max. recording ...