STMicroelectronics L298N, Brushed Motor Driver IC, 46 V 4A 15-Pin, MULTIWATT V

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

L298 Dual Full Bridge Motor Driver

ST Microelectronics presents its L298 dual full bridge driver series. The L298 series from ST is an integrated high voltage, high current dual full bridge driver. These devices are specially designed to accept standard TTL logic and drive inductive loads in Relays, Solenoids, DC and Stepper Motors. Featured are two enable inputs that allow the L298 to be enabled or disabled independently of the input signals. The emitters of the lower transistors of each bridge are connected together, the corresponding external terminal can be used to connect an external sensing resistor. In addition, a supply input is provided so that the logic works at a lower voltage.

Features

  • Operating supply voltage up to 46 V
  • Total DC current of up to 4 A
  • Low saturation voltage
  • Over-temperature protection
  • Logical "0" input voltage up to 1.5 V (high noise immunity)

What are Motor Driver IC's?

Motor Driver ICs are current amplifiers and are an essential component of motor interfacing. The motor driver integrated circuit chip acts as the interface between a microprocessor or microcontroller, and a motor. As microprocessors tend to operate at lower currents, and motors at higher, motor driver ICs are needed to supply current to the motor as needed. The RS Components range of Motor Driver ICs includes models from leading brands, in various types and configurations to support your design needs.

Motor Controllers & Drivers, STMicroelectronics

Specifications
Attribute Value
Motor Type Brushed DC
Output Configuration Dual Full Bridge
Maximum IGBT Collector Current 4A
Maximum Collector Emitter Voltage 46 V
Mounting Type Through Hole
Package Type MULTIWATT V
Pin Count 15
Maximum Operating Supply Voltage 46 V
Minimum Operating Supply Voltage 4.8 V
Height 10.7mm
Maximum Operating Temperature +130 °C
Length 19.6mm
Dimensions 19.6 x 5 x 10.7mm
Width 5mm
Minimum Operating Temperature -25 °C
300 In Global stock for delivery within 4 - 6 working days
Price Each (In a Tube of 25)
MYR 16.046
units
Per unit
Per Tube*
25 - 25
MYR16.046
MYR401.15
50 - 100
MYR15.564
MYR389.10
125 - 225
MYR15.097
MYR377.425
250 - 475
MYR14.342
MYR358.55
500 +
MYR13.625
MYR340.625
*price indicative
Related Products
Accurate position controlHigh efficiencyLow-Power consumptionApplications in automotive, vending ...
Description:
Accurate position controlHigh efficiencyLow-Power consumptionApplications in automotive, vending machines, ATM machines, paper feed in printers, scanners, security cameras.
Infineon offer a variety of drivers that offer ...
Description:
Infineon offer a variety of drivers that offer a solution for motor controls and drives. The selection includes Integrated Full-Bridge, Powertrain H-Bridge, TrilithIC, NovalithIC as well as Servo and Stepper motor drivers.The H-bridge is suited to applications such as DC ...
A range of advanced Smart Power Modules from ...
Description:
A range of advanced Smart Power Modules from Fairchild Semiconductor which provide compact high performance solutions for many inverter motor drive applications. The modules integrate optimized gate drive for the built-in power MOSFETs to minimize EMI and losses and also ...
BD63710AEFV is a bipolar low-consumption driver that driven ...
Description:
BD63710AEFV is a bipolar low-consumption driver that driven by PWM current. Rated power supply voltage of the device is 36 V, and rated output current is 1.0 A. CLK-IN driving mode is adopted for input interface, and excitation mode is ...