Microchip MTD6508-ADJE/JQ, BLDC Motor Driver IC, 5 V 0.75A 16-Pin, UQFN

  • RS Stock No. 145-9108
  • Mfr. Part No. MTD6508-ADJE/JQ
  • Manufacturer Microchip
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): TH
Product Details

MTD6508 3-Phase BLDC Motor Driver

From Microchip the MTD6508 device is a 3-phase full-wave sensorless driver for brushless DC (BLDC) motors that features a 180° sinusoidal drive, high torque output and silent drive. The MTD6508 is designed to cover a wide range of motor characteristics with the minimum of external components. Speed control can be achieved through Power Supply Modulation (PSM) or Pulse-Width Modulation.

Features

180° Sinusoidal Drive for High Efficiency and Low Acoustic Noise
Position Sensorless BLDC Driver - No Hall Effect Sensor Required
Integrated Power Transistors
Supports 2V to 5.5V Power Supplies
Variable Programming Resistor (RPROG) Setting to fit Motor Constant (KM) Range from 3.25 mV/Hz to 52 mV/Hz
Speed Control through Power Supply Modulation (PSM) and/or Pulse-Width Modulation (PWM)
Built-in Frequency Generator: FG, FG/3 Output Signal
Output PWM Slew Rate Control Programmable with an External Resistor for Start-up (Adjustable MTD6508-ADJ model only)
Phase Target Selection for Regulation (Adjustable MTD6508-ADJ model only)
Start-up Strength Selection (Adjustable MTD6508-ADJ model only)
Start-up Output Current Controlled by PWM
Output Current Soft Start
Built-in Lock-up Protection and Automatic
Recovery Circuit
Built-in Overcurrent Limitation
Built-in Thermal Shutdown Protection
Built-in Overvoltage Protection
Low Minimal Start-up Speed for Low-Speed Operation

Motor Controllers & Drivers, Microchip

Specifications
Attribute Value
Motor Type BLDC
Output Configuration 3 Phase
Maximum IGBT Collector Current 0.75A
Maximum Collector Emitter Voltage 5 V
Mounting Type Surface Mount
Package Type UQFN
Maximum Operating Supply Voltage 5.5 V
Pin Count 16
Minimum Operating Supply Voltage 2 V
Typical Switching Frequency 100kHz
Height 0.55mm
Minimum Operating Temperature -40 °C
Dimensions 4 x 4 x 0.55mm
Length 4mm
Maximum Operating Temperature +125 °C
Width 4mm
819 In Global stock for delivery within 4 - 6 working days
Price Each (In a Tube of 91)
Was MYR2.44
MYR 2.299
units
Per unit
Per Tube*
91 +
MYR2.299
MYR209.209
*price indicative
Related Products
The Microchip MCP1623 and MCP1624 are Adjustable, Fixed ...
Description:
The Microchip MCP1623 and MCP1624 are Adjustable, Fixed Frequency, Synchronous Step-Up DC-DC Converters. Primarily they are designed to offer a compact and highly efficient power supply solution for PIC Microcontrollers in one-, two- and three-cell battery powered applications. The desired ...
The MCP1642 family of devices from Microchip are ...
Description:
The MCP1642 family of devices from Microchip are compact, high-efficiency, fixed-frequency, synchronous step-up DC-DC converters. These regulators are designed for applications powered by alkaline, NiCd, NiMH, Li-Ion or Li-Polymer batteries. Up to 96% Typical Efficiency1.8A Typical Peak Input Current LimitIOUT ...
The MIC69301/2/3 is the 3A output current member ...
Description:
The MIC69301/2/3 is the 3A output current member of the MIC69xxx family of high-current, low-voltage regulators, which support currents of 1A, 1.5A, 3A, and 5A. This family operates from a single low voltage supply, yet offers high precision and ultra-low ...
The Si875x combines robust CMOS isolation technology with ...
Description:
The Si875x combines robust CMOS isolation technology with a MOSFET driver to establish a complete, isolated switch.Input side voltages on the Si8751 are flexible from 2.25 V to 5.5 V. Si8751 digital CMOS pin control inputSi8752 diode emulation input10 V ...