Intelligent Embedded Solutions IES-SHIELD-SCX18 Servo shield Stepper Shield for Arduino

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

Servomotor Controller Plug-in Module (Shield) for Arduino

This 18-channel R/C servomotor driver shield is designed for the Arduino UNO microcontroller board but is compatible with all other Arduino boards and the Raspberry Pi via the high speed I²C interface. Typical applications include humanoid and multi-limbed 'walking' format robots.

• Standard Arduino UNO Shield form factor
• 256 steps of angular shaft position
• 16-level speed control for each servo
• Movement complete and soft-start complete status for each servomotor
• Global activation control ensures all servos react together
• Standard R/C servomotor connection headers
• Communication via 400kHz serial I²C bus
• Jumper-selectable I²C address
• Jumper-selectable I²C pull-ups (Not required for Raspberry Pi)
• Two +5V @ 3A regulators with heatsinks for motor power supply
• Up to four shields can be linked together via the I²C bus controlling up to 72 servomotors
• Screw connector for motor power supply
• Operating temperature range: 0 to +70°C
• Dimensions: 56.25 x 53.5 x 15mm

Compatible Servomotors

781-3058 Standard 180° Servomotor 781-3046 Standard Continuous-Rotation Servomotor, 50rpm
790-5220 Standard Continuous-Rotation Servomotor, 180rpm

Intelligent Embedded Solutions

Specifications
Attribute Value
Kit Name Servo shield
Kit Classification Shield
For Use With Arduino
Motor Type Stepper
6 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 330.47
units
Per unit
1 - 9
MYR330.47
10 +
MYR323.96
Related Products
The X-NUCLEO-PLC01A1 is an input/output expansion board which ...
Description:
The X-NUCLEO-PLC01A1 is an input/output expansion board which provides an STM32 Nucleo MCU board with industrial PLC (Programmable Logic Controller) functionality. • 8 x inputs protected by a CLT01-38SQ7 digital termination array • 8 x outputs driving a VNI8200XP octal ...
The 12V Protected switch shield for Arduino comes ...
Description:
The 12V Protected switch shield for Arduino comes with BTS50015-1TAD (RDS(ON) 1.5mΩ), an ultra-low ohmic smart high-side power switch from the Power PROFET™ family. Designed for relay and fuse replacement in power distribution and junction boxes, Power PROFET™ can drive ...
The X-NUCLEO-NFC03A1 is an NFC card reader evaluation ...
Description:
The X-NUCLEO-NFC03A1 is an NFC card reader evaluation board based on the CR95HF 13.56MHz multi-protocol contactless transceiver IC. • CR95HF-VMD5T contactless NFC/RFID Reader/Writer • 47 x 34mm, four-turn PCB antenna loop • Antenna tuning circuit • Operating Frequency: 13.56MHz • ...
The IES-SHIELD-GPS and IES-SHIELD-GPAM modules are highly integrated ...
Description:
The IES-SHIELD-GPS and IES-SHIELD-GPAM modules are highly integrated multi-channel simultaneous GPS and GLONASS positioning systems. Both modules include programmable analogue input/digital GPIO. IES-SHIELD-GPAM additionally features an on-board 3-axis accelerometer. Although both modules have an Arduino-shield ...