Toshiba 74VHC221AFT Dual Monostable Multivibrator 8mA, 16-Pin TSSOP

  • RS Stock No. 171-3459
  • Mfr. Part No. 74VHC221AFT
  • Manufacturer Toshiba
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

The 74VHC123A/221AFT are high speed CMOS MONOSTABLE MULTIVIBRATOR fabricated with silicon gate C2MOS technology. There are two trigger inputs, A input (negative edge), and B input (positive edge). These inputs are valid for a slow rise/fall time signal (tr = tf = 1 s) as they are schmitt trigger inputs. This device may also be triggered by using CLR input (positive edge).After triggering, the output stays in a MONOSTABLE state for a time period determined by the external resistor and capacitor (RX, CX). A low level at the CLR input breaks this state. Limits for CX and RX are:External capacitor, CX: No limit External resistor, RX: VCC = 2.0 V more than 5 kΩ CC ≥ 3.0 V more than 1 kΩ An input protection circuit ensures that 0 to 5.5 V can be applied to the input pins without regard to the supply voltage. This device can be used to interface 5 V to 3 V systems and two supply systems such as battery back up. This circuit prevents device destruction due to mismatched supply and input voltages

Wide operating temperature range: Topr = -40 to 125 
High speed: Propagation delay time = 8.1 ns (typ.) at VCC = 5 V
Low power dissipation:
Standby state: 4.0 μA (max) at Ta = 25 
Active state: 750 μA (max) at Ta = 25 
High noise immunity: VNIH = VNIL = 28 % VCC (min)
Power-down protection is provided on all inputs.
Balanced propagation delays: tPLH ≈ tPHL
Wide operating voltage range: VCC(opr) = 2.0 V to 5.5 V
Pin and function compatible with 74HC123,74HC221 type

Specifications
Attribute Value
Logic Family 74VHC
Logic Function Monostable Multivibrator
Number of Elements per Chip 27
Maximum High Level Output Current -8mA
Maximum Low Level Output Current 8mA
Minimum Pulse Width 5 ns
Maximum Propagation Delay Time @ Maximum CL 24.5ns
Maximum Quiescent Current 80µA
Mounting Type Surface Mount
Package Type TSSOP
Pin Count 16
Dimensions 5 x 4.4 x 1mm
Height 1mm
Length 5mm
Minimum Operating Supply Voltage 2 V
Automotive Standard AEC-Q100
Propagation Delay Test Condition 50pF
Maximum Operating Temperature +125 °C
Width 4.4mm
Maximum Operating Supply Voltage 5.5 V
Minimum Operating Temperature -40 °C
2100 In Global stock for delivery within 4 - 6 working days
Price Each (In a Pack of 50)
MYR 0.962
units
Per unit
Per Pack*
50 - 50
MYR0.962
MYR48.10
100 - 450
MYR0.854
MYR42.70
500 - 950
MYR0.768
MYR38.40
1000 +
MYR0.699
MYR34.95
*price indicative
Packaging Options:
Related Products
The 74LVC541A is an octal non-inverting buffer/line driver ...
Description:
The 74LVC541A is an octal non-inverting buffer/line driver with 5 V tolerant inputs and outputs. The 3-state outputs are controlled by the output enable inputs OE1 and OE2. This device is fully specified for partial power-down applications using IOFF. The ...
CMOS Logic gates with LVTTL compatible inputs and ...
Description:
CMOS Logic gates with LVTTL compatible inputs and outputs, offering higher speed and greater drive capability than 74LCX devices. Wide 1.65 to 5.5V operating supplyLVCMOS Compatible24mA source/sink capacity at 3.0V.
The 74LVC245A, 74LVCH245A are 8-bit transceivers featuring non-inverting ...
Description:
The 74LVC245A, 74LVCH245A are 8-bit transceivers featuring non-inverting 3-state bus compatible outputs in both send and receive directions. The device features an output enable (OE) input for easy cascading and a send/receive (DIR) input for direction control. OE controls the ...
The 74AHC are an advanced high-speed series of ...
Description:
The 74AHC are an advanced high-speed series of CMOS devices from Diodes Inc. Suitable for general purpose, the logic ICs are compatible with a wide variety of applications. The Diodes Inc logic range also boasts mixed voltage environment capabilities and ...