Phoenix Contact Voltage Monitoring Relay, 3 Phase, DPDT, DIN Rail
- RS Stock No.:
- 890-3887
- Mfr. Part No.:
- 2905597
- Manufacturer:
- Phoenix Contact
5 In Global stock for delivery in 4-6 working days, delivery time may vary for certain locations or FTZ
Added
Price Each
MYR615.30
| Units | Per Unit |
| 1 + | MYR615.30 |
- RS Stock No.:
- 890-3887
- Mfr. Part No.:
- 2905597
- Manufacturer:
- Phoenix Contact
Technical data sheets
Legislation and Compliance
- COO (Country of Origin):
- AT
Product Details
EMD Monitoring Relays
This range of multifunctional monitoring relays allows to monitor electrical as well as physical system parameters.
EMD Monitoring Relays can measure:
EMD Monitoring Relays can measure:
Currents
Voltages, 1- and 3-phase
Phase sequences
Real powers
Loads, cos φ
Motor winding temperatures
Fill levels
Voltages, 1- and 3-phase
Phase sequences
Real powers
Loads, cos φ
Motor winding temperatures
Fill levels
Phoenix Contact Voltage Monitoring Relay, 177 to 794V AC Input, 48 to 63Hz Frequency Sensing - EMD-SL-PH-690 - 2905597
Looking for a way to ensure safe voltages in your electrical setup? Choose this voltage monitoring relay from Phoenix Contact. It uses built-in colour-coded LEDs to alert you to power supply issues like undervoltage, phase failure or phase asymmetry, so monitoring is simple. It's designed for mounting in any position on a DIN rail for simple and versatile installation.
The terminal block has a fast-blow 5A fuse that instantly breaks the circuit in the event of an excessively high current, helping to protect you and your equipment against dangerous power surges. To suit the needs of your system, you can set a response delay time between 0.1 and 10s. Thanks to its broad input voltage range of 177 to 794V AC, this unit is suitable for use in a wide variety of electrical setups.
The terminal block has a fast-blow 5A fuse that instantly breaks the circuit in the event of an excessively high current, helping to protect you and your equipment against dangerous power surges. To suit the needs of your system, you can set a response delay time between 0.1 and 10s. Thanks to its broad input voltage range of 177 to 794V AC, this unit is suitable for use in a wide variety of electrical setups.
• Adheres to IEC 60664-1 standards for insulation
• Robust service life of up to 20 million mechanical cycles for long-lasting performance
• Compact dimensions of 90 (height) x 22.5 (width) x 113mm (depth) to take up minimal space on a DIN rail
• Robust service life of up to 20 million mechanical cycles for long-lasting performance
• Compact dimensions of 90 (height) x 22.5 (width) x 113mm (depth) to take up minimal space on a DIN rail
Specifications
Attribute | Value |
|---|---|
| Monitoring Application | Voltage |
| Electrical Phase | 3 |
| Contact Configuration | DPDT |
| Voltage Sensitivity | Undervoltage |
| Mounting Type | DIN Rail |
| Phase Sensitivity | Phase Failure, Phase Sequence |
| Frequency Sensing Range | 48 → 63Hz |
| Series | EMD-SL-PH-690 |
| Minimum Frequency Sensed | 48Hz |
| Length | 113mm |
| Maximum Frequency Sensed | 63Hz |
| Height | 90mm |
| Dimensions | 113 x 22.5 x 90mm |
| Maximum Operating Temperature | +70°C |
| Width | 22.5mm |
| Minimum Operating Temperature | -25°C |
| Number of Poles | 2 |
| Special Features | 2PDT, Adjustable Response Delay, Phase Failure Monitoring, Phase Sequence Monitoring, Undervoltage Monitoring |
| Terminal Type | Screw |
| Operating Temperature Range | +70°C |