ABB Temperature Monitoring Relay With SPDT Contacts, 24 V ac/dc

  • RS Stock No. 876-4991
  • Mfr. Part No. 1SVR740700R0100
  • Manufacturer ABB
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

CM-MSS Thermistor Motor Protection Relays

Heavy duty starting
Increased switching frequency
High ambient temperature
Insufficient cooling
Break operation
Unbalance

The CM range of thermistor motor protection relays are used to control motors equipped with PTC temperature sensors. The PTC temperature sensors are incorporated in the motor windings to measure the motor heating. This enables direct control and evaluation of the following operating conditions:

Main features include:
Dynamic interrupted wire detection
Wide control supply voltage rang 24-240 V AC/DC
Short circuit monitoring of the sensor circuit
Non-volatile fault storage
Remote reset
Screw connection technology or Easy Connect Technology available

Single Sensor Input Version
Wire Break Detection

Technical Specification
Manufacturer Part No. Supply Voltage Output Manual Reset Remote Reset Test Button Stock Number
1SVR430800R9100 24Vac/dc 1NO No No No 464-518
1SVR430801R1100 220-240Vac 1NO No No No 464-520
1SVR430810R9300 24Vac/dc 2CO Yes Yes No 464-570
1SVR430811R0300 110-130Vac 2CO Yes Yes No 464-574
1SVR430811R1300 220-240Vac 2CO Yes Yes No 464-568
1SVR430711R0300 110-130Vac 2CO Yes Yes Yes 464-564
1SVR430711R2300 380-440Vac 2CO Yes Yes Yes 464-558
1SVR430720R0400 24-240Vac/dc 1NO 1NC Yes Yes Yes 464-552
1SVR430720R0300 24-240Vac/dc 2CO Yes Yes Yes 464-546

Approvals

Some products also have the ATEX approval for the use in hazardous areas.

Specifications
Attribute Value
Monitoring Application Temperature
Supply Voltage 24 V ac/dc
Contact Configuration SPDT
Time Delay <100 ms
Temperature Sensitivity Overtemperature, Winding Temperature
Current Range Maximum of 3.7 mA
Terminal Type Push In
Series CM-MSS
Number of Poles 1
Standards Met CB Scheme, CCC, CE, CULus, EAC, EMC, GL, IEC/EN 60255-1, IEC/EN 60947-8, RCM, RoHS
Operating Temperature Range -25 → +60 °C
Minimum Operating Temperature -25°C
Width 22.5mm
Maximum Operating Temperature +60°C
Height 85.6mm
Dimensions 103.7 x 22.5 x 85.6 mm
Special Features Automatic Reset, Fail-Safe, Inbuilt PTC Sensor, Insufficient Cooling Protection, One Measuring Circuit, Over Heating Protection, Over Load Protection
Mounting Type DIN Rail, Snap-In
Length 103.7mm
1 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 368.13
units
Per unit
1 +
MYR368.13
Related Products
This relay acts as a safety device in ...
Description:
This relay acts as a safety device in gas-heated residential housing, by controlling the boiler and the stale air extraction system.Red indicator light on front panel indicates an air extraction fault.Connection by cage terminals.
Omron K8DT-TH temperature monitoring relay, ideal to prevent ...
Description:
Omron K8DT-TH temperature monitoring relay, ideal to prevent heater overheating. Featuring a self-latching output to contribute to safe equipment operation. Set the temperature with simple rotary switchesConnect a thermocouple or platinum resistance thermometer.Width of 17.5 mm to reduce space required ...
Thermistor motor protection relay Compact evaluation unit 17.5 ...
Description:
Thermistor motor protection relay Compact evaluation unit 17.5 mm enclosure Screw terminal 1 NO contact, 1 NC contact US = 24 V-240 V AC/DC Auto RESET suitable for bimetallic switch 2 LEDs (Ready/Tripped) galvanic isolation.
The MK9052 motor protection relay is used to ...
Description:
The MK9052 motor protection relay is used to prevent thermal overloads in motors (for example as caused by high switching frequencies, heavy start-up loads, single phase operation, interrupted cooling, high ambient temperature).Special thermistors (PTC resistors) developed specifically for motor protection ...