Dold Current Monitoring Relay With DPDT Contacts, 24 230 V ac/dc

  • RS Stock No. 445-9046
  • Mfr. Part No. IL5882.38 AC/DC24V-230V Tv=5S
  • Manufacturer Dold
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

Differential current monitor IL 5882

Detection ranges from 30 mA → 10 A with a connected ND 5019 differential current transformer
Programmable for automatic or manual reset after error rectification
Rest current principle
With advance warning
Delete and test buttons
Wire breakage detection
Short reaction time
Adjustable response delay
LED displays for auxiliary voltage and contact position
2 x 1 changeover

Detects insulation faults in earthed networks such as RCCBs but without interruption. For monitoring and preventive maintenance of electrical systems.

Standards

IEC 255, EN 61 557, VDE 0413

Specifications
Attribute Value
Monitoring Application Current
Supply Voltage 24 230 V ac/dc
Contact Configuration DPDT
Minimum Current Sensed 10mA
Maximum Current Sensed 10A
Time Delay 0 5 s
Operating Temperature Range -20 +60 °C
Height 90mm
Width 35mm
Length 63mm
Dimensions 63 x 35 x 90 mm
Current Range 10 mA 10 A
Minimum Operating Temperature -20°C
Maximum Operating Temperature +60°C
1 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 1,151.09
units
Per unit
1 +
MYR1,151.09
Related Products
TELE ENYA series level control monitoring relay for ...
Description:
TELE ENYA series level control monitoring relay for conductive liquids. Featuring pump up and pump down monitoring and a single change over contact. The ENYA series have a self-extinguishing plastic body with an IP rating of IP40. DIN Rail mountLED ...
TELE GAMMA series level control monitoring relay for ...
Description:
TELE GAMMA series level control monitoring relay for conductive liquids. Featuring pump up and pump down monitoring and a single change over contact. The GAMMA series have a self-extinguishing plastic body with an IP rating of IP40. DIN Rail mountLED ...
The MK9052 motor protection relay is used to ...
Description:
The MK9052 motor protection relay is used to prevent thermal overloads in motors (for example as caused by high switching frequencies, heavy start-up loads, single phase operation, interrupted cooling, high ambient temperature).Special thermistors (PTC resistors) developed specifically for motor protection ...
3RN1 thermistor motor protection devices are thermal protection ...
Description:
3RN1 thermistor motor protection devices are thermal protection devices that are suitable, in combination with type A PTC resistors (cold conductors), for monitoring the temperature of electrical drives, transformer windings, oils, bearings, air etc. Work according to the closed circuit ...