Siemens Thermistor motor protection relay Monitoring Relay With SPDT Contacts, 24 V ac/dc

  • RS Stock No. 392-7245
  • Mfr. Part No. 3RN1011-1CB00
  • Manufacturer Siemens
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

SIRIUS 3RN10 10 // 11 Thermistor motor protection relay

Work according to the closed circuit current principle (monostable design) and therefore self-monitoring with regard to wire breakage
Triggered when control voltage fails
Electrical separation for devices with AC control voltage
Overall width of 22.5 mm
Screw connection

3RN1 thermistor motor protection devices are thermal protection devices that are suitable, in combination with type A PTC resistors (cold conductors), for monitoring the temperature of electrical drives, transformer windings, oils, bearings, air etc.

Standards

EN 50081-2, EN 50082-2 and DIN VDE 0660 Parts 302 and 303 and IEC 34-11-2 Section 1 and 2

Note

!!! Phase-out product !!! This product is in obsolescence mode and is due for discontinuation by the manufacturer. We recommend that you review the preferred successor proposed by the manufacturer: 175-2281 (3RN2011-1BA30)

Siemens 3RN1 Thermistor Relays

3RN1 thermistor relays are a range of thermal protection devices, which when used in conjunction with external PTC thermistors, offer temperature monitoring of electrical drives, transformers and other critical components such as bearings. The 3RN1 range operates on the principle of closed-circuit current and are therefore self monitoring in the event of sensor wire breakage.

Specifications
Attribute Value
Monitoring Application Thermistor motor protection relay
Supply Voltage 24 V ac/dc
Contact Configuration SPDT
Temperature Sensitivity Overtemperature, Undertemperature
Temperature Sensing Range +60 → +180°C
Length 91mm
Width 22.5mm
Maximum Operating Temperature +60°C
Height 102mm
Dimensions 91 x 22.5 x 102 mm
Minimum Operating Temperature -25°C
Operating Temperature Range -25 → +60 °C
Maximum Temperature Sensed +180°C
Minimum Temperature Sensed +60°C
5 Within 4 working day(s) (Global stock)
9 Within 4 working day(s) (Global stock)
Price Each
MYR 401.10
units
Per unit
1 +
MYR401.10
Related Products
This relay acts as a safety device in ...
Description:
This relay acts as a safety device in gas-heated residential housing, by controlling the boiler and the stale air extraction system.Red indicator light on front panel indicates an air extraction fault.Connection by cage terminals.
Thermistor motor protection relay Compact evaluation unit 17.5 ...
Description:
Thermistor motor protection relay Compact evaluation unit 17.5 mm enclosure Screw terminal 1 NO contact, 1 NC contact US = 24 V-240 V AC/DC Auto RESET suitable for bimetallic switch 2 LEDs (Ready/Tripped) galvanic isolation.
The MK9052 motor protection relay is used to ...
Description:
The MK9052 motor protection relay is used to prevent thermal overloads in motors (for example as caused by high switching frequencies, heavy start-up loads, single phase operation, interrupted cooling, high ambient temperature).Special thermistors (PTC resistors) developed specifically for motor protection ...
Compact, low cost unit, with LED 'tripped' indicator ...
Description:
Compact, low cost unit, with LED 'tripped' indicator and 1 change over relay contact. Reset is automatic when sensor has cooled down. Control and signalling voltages should have the same potential. Standard 22.5mm module width.