Harmony Harmony XVB Beacon Unit, Red Xenon, Flashing Light Effect, 24 V ac/dc

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Schneider XVBC Modular Signal Tower

The Schneider Harmony XVBC series is a visual and audible signalling tower used for indicating the various states of operation for a device or installation, such as: start, stop machine, no material, call technical staff, and fault signalling.
These signal towers offer a high degree of protection, extra brightness and excellent reliability enable them to adapt to any type of environment.
Industry applications include machine manufacturers (assembly line, etc.), mobile loads (travelling cranes, trolleys, etc.). Para-industrial and service sector include motorway tolls, cash registers, distribution switchboards, etc.

Features and Benefits

• Available as incandescent (bulbs must be ordered separately) or LED modules
• May be assembled with up to 5 light modules or 4 light modules and 1 sound module
• Buzzers are available with intermittent or continuous tones
• Base & cover need to be ordered separately for mounting
• Tubes and tube cover available for raising the beacons height
• Sound unit operates from a 12-48 Vac or 120-230 V supply providing a sound level of 90 dB at a frequency of 0-12 kHz
• All units have an operating termperature range of -25 to +50 °C (apart from the static lens units without lamps -25 to +70 °C)
• Made from Glass Reinforced Polyamide and Polycarbonate
• IP65 rated
• Long distance signalling: 35 to 50 m
• Units are 70 mm in diameter and 63 mm in height
• Cable access from side or beneath

Protection ratings & safety features:

• High degree of protection: IP66
• International standards: CE, UL, CCC, CSA, Ghost

Applications:

Loud, dangerous and busy environments often call for modular beacons and tower lights, from health & safety to preventing damage to machinery there are many applications. Below are some of the applications for the XVB Series:
• Assembly lines
• Mobile loads (travelling cranes, trolleys etc.)
• Motorway tolls
• Cash registers
• Distribution switchboards
• Alarms

Note

Bulbs, base and covers need to be ordered separately for mounting, accessories such as tubes and tube covers are also available for raising the beacons height.

Standards

Conforms to: IEC/EN 60947-5-1 (beacons, base and cover).

Approvals

CE, UL, CCC, CSA, Ghost.

Specifications
Attribute Value
Range Harmony
Series Harmony XVB
Component Type Beacon
Current Type AC, DC
Light Effect Flashing
Lens Colour Red
Lamp Included Yes
Bulb Type Xenon
Supply Voltage 24 V ac/dc
Height 157mm
Base Diameter 70mm
Housing Colour Black
IP Rating IP65
Minimum Temperature -25°C
Maximum Temperature +50°C
2 Within 4 working day(s) (Global stock)
1 Within 4 working day(s) (Global stock)
Price Each
MYR 1,011.82
units
Per unit
1 +
MYR1,011.82
Related Products
Multifunctional, 32-sound sirens used to indicate a fault, ...
Description:
Multifunctional, 32-sound sirens used to indicate a fault, machine or installation hazard. May also be used for emergency fire evacuations, thanks to AFNOR NFS 32001 selectable sounds .Automatic synchronisation of sounds when several sirens are installed in parallel.Excellent resistance to ...
The XA125 DIN Base Sounder / Beacon utilises ...
Description:
The XA125 DIN Base Sounder / Beacon utilises a discharge capacitor and converter circuit to ignite Xenon gas inside a tube, resulting in 3 joules of flash energy yet with the advantage of low current consumption. Two Piezo sounders located ...
The SB150-1 electronic combined sounder beacon has been ...
Description:
The SB150-1 electronic combined sounder beacon has been approved for use in potentially explosive atmospheres, hazardous areas and very harsh environmental conditions. Typical applications are Oil and Gas, On-shore & Offshore, Chemical, Petrochemical, Refineries & Marine locations, etc.This warning device ...
The WERMA KombiSIGN 70 modular stacking signal tower ...
Description:
The WERMA KombiSIGN 70 modular stacking signal tower is an ideal solution to the increasing requirement for safety, machine productivity and reduced downtime. The modular design of these stacking towers enables quick and easy installation. Each KombiSIGN module is equipped ...