RE130-LF, Single Sided Matrix Board FR4 with 44 x 42 1mm Holes, 2 x 2mm Pitch, 95.89 x 90.17 x 1.5mm

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): PL
Product Details

Prototype Board, standard, 2 mm grid, RE130

35 μm CU on one side
HAL hot dip tin-plated
Hole pattern: 2 x 2 mm (0.79mil)
Soldering islands 1.6 mm²
44 x 42 holes in rows
Hole diameter: 0.8 mm
Soldering side with solder mask
Size: 90.17 x 95.89 mm
Operating temperature: max. 150 °C
Fixed soldering bath: 260 °C, max. 50 sec

DIN Type Matrixboard

Matrix boards with 1mm holes on a 2.54mm pitch.

Specifications
Attribute Value
Number of Sides 1
Hole Pitch 2 x 2mm
Dimensions 95.89 x 90.17 x 1.5mm
Length 95.89mm
Width 90.17mm
Thickness 1.5mm
Base Material Epoxy Glass Fabric Laminate
Hole Diameter 1mm
FR Material Grade FR4
Hole Layout 44 x 42
Copper Thickness 35µm
8 Within 4 working day(s) (Global stock)
102 Within 4 working day(s) (Global stock)
Price Each
MYR 30.32
units
Per unit
1 - 9
MYR30.32
10 - 19
MYR29.72
20 - 49
MYR29.25
50 +
MYR27.99
Related Products
Matrix boards with 1mm holes on a 2.54mm ...
Description:
Matrix boards with 1mm holes on a 2.54mm pitch. Single-sided boards for wiring by wrapping, with optimum flexibility and maximum density.The DIP sockets are held in place by soldering the outer pins to the corresponding square pads.Reference grid on both ...
SEG type is the optimum common earth type ...
Description:
SEG type is the optimum common earth type for high-frequency circuits2.54 mm pitch, board installation hole Ø 4 → 3.2.
Single-sided copper-tin plated square pad cards.2.54 mm drilled ...
Description:
Single-sided copper-tin plated square pad cards.2.54 mm drilled pitch.Gap between tracks is 0.54 mm.Square pads 2 mm x 2 mm.
Single-sided copper-tin plated stripboard.2.54 mm drilled pitch.Board thickness: ...
Description:
Single-sided copper-tin plated stripboard.2.54 mm drilled pitch.Board thickness: 1.6 mm.