Rawl Fixings Steel Masonry Anchor M10, fixing hole diameter 12 mm, 14 mm, length 100mm

Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
Product Details

Sleeve Anchor Bolts - Loose

All purpose expansion anchor for use in medium weight applications in brickwork, blockwork and hard masonry. Through fixing allows drilling through pre-positioned fixture. Manufactured from zinc-plated steel.

Features and Benefits.

  • R-RLK-P Rawlok Mechanical Expansion Anchor Plug.

  • Bolt projecting.

  • All purpose.

  • Medium weight anchor applications.

  • Maximum performance in most base material.

  • Integral collapse feature (ensures maximum clamping force).

  • Bolt and drill size marked on the Expansion anchor bolt sleeve.

Typical Anchor Plug Masonry Fixings Applications.

  • Radiators.

  • Signs.

  • Stadium seating.

  • Satellite dishes.

  • Wall plates.

  • Shutters.

  • Garage doors.

Material the R-RLK-P Rawlok Expansion Anchor Plug is Compatible with?

  • Material the R-RLK-P Rawlock Expansion Anchor Plug is Compatible with?

  • Non-cracked concrete (C20/25-C50/60 Approval).

  • Solid brick.

  • Reinforced concrete.

  • Natural stone (only after site testing).

R-RLK-P Rawlok Expansion Anchor Plug Fixings Available?

  • Stock number 530422, M6, steel, shield anchor projecting bolt, 8 mm x 40 mm.

  • Stock number 530438, M6, steel, shield anchor projecting bolt, 8 mm x 65 mm.

  • Stock number 530450, M8, steel, shield anchor projecting bolt, 10 mm x 50 mm.

  • Stock number 530466, M8, steel, shield anchor projecting bolt, 10 mm x 75 mm.

  • Stock number 530472, M8, steel, shield anchor projecting bolt, 10 mm x 95 mm.

  • Stock number 530488, M10, steel, shield anchor projecting bolt, 12 mm x 60 mm.

  • Stock number 530494, M10, steel, shield anchor projecting bolt, 12 mm x 70 mm.

  • Stock number 530501, M10, steel, shield anchor projecting bolt, 12 mm x 100 mm.

  • Stock number 530517, M10, steel, shield anchor projecting bolt, 12 mm x 130 mm.

How to use the R-RLK-P Rawlok Expansion Anchor Plug?

  • Drill a hole (have pre-drilled hole ready) ensure that it is the correct diameter and depth needed.

  • Special note: If fixing into brickwork avoid all mortar joint areas.

  • Clean out the drilled hole removing all debris and dust (important to thoroughly remove everything).

  • Insert the Rawlock through the fixture into the pre-drilled hole.

  • Tighten the fixing (screw) carefully, only to the recommended torque.

What is an Expansion Anchor?

An expansion anchor is a fixing which is mainly used in a solid base material that when fixed in place gives you the fixing required through the expansion of the anchor. A pre-expanded anchor is simply inserted into a drilled hole and when tightened exerts pressure (expansion within the hole to provide a solid fixing). An un-expanded anchor requires the anchor to be set once installed into the drilled hole.

Specifications
Attribute Value
Thread Size M10
Type Shield Anchor Projecting Bolt
Length 100mm
Fixing Hole Diameter 12mm
Maximum Fixing Thickness 50mm
Material Steel
240 In Global stock for delivery within 4 - 6 working days
Price Each (In a Pack of 10)
Was MYR10.839
MYR 10.726
units
Per unit
Per Pack*
10 +
MYR10.726
MYR107.26
*price indicative