RS Brand Stainless Steel Screwed End Ball Valves for the control of flow.
Full port 1/4" to 4" (DN8 to DN100)
W.P: 1000 WOG (PN63)
W.T: -20°C to 200°C
Investment casting
Blow-out proof stem
Locking device
ISO 5211 Mounting pad
Thread type: ASME B1.20.1 (NPT) DIN2999 & BS21 ISO7/1 & EN10226
Body & Cap - ASTM A350-CF8M/ASTM A216-WCB
Ball - ASTM A351-CF8M
Stem - ASTM A276-316
Seat - PTFE/RTFE
Seal, Packing and Thrust Washer - PTFE
Gland Nut, Spring Washer, Stem Nut, Bolt & Nut - AISI 304
Handle & Locking Device - Stainless Steel
Handle Sleeve - PVC
3-piece design allows in-situ maintenance and servicing
Lockable Full Bore valves with thermally insulating lever sleeve
Incorporates ISO-5211 mounting flange for suitable actuator
Blow Out Proof Stem with Adjustable Stem packing
Seal, Thrust Washer, Stem Pack Material - P.T.F.E
Seat Material - P.T.F.E (15% Reinforced Glassfibre)
Maximum Operating Temperature | +230°C |
Note that pressure rating falls linearly with temperature to 7 bar at 230°C |
Attribute | Value |
---|---|
Attachment Type | Threaded |
Threaded Connection | 1-1/2 in |
Body Material | Stainless Steel |
Thread Size | 1-1/2in |
Safe for Use With | Gas, Oil, Water |
Maximum Working Pressure | 1000 psi |
Connection Size mm | 40mm |
Connection Size inch | 1 1/2in |
Type | 2 Way |