Digitron 2000P Manometer

  • RS Stock No. 313-0233
  • Mfr. Part No. 2023P7
  • Manufacturer Digitron
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

Digitron 2023P, 0-7 bar, Differential Manometer

The Digitron 2023P handheld differential manometer takes pressure measurements over a wide range of pressures. It is of robust design, to IP67 with hose connected, and operates between -10 and +50 °C. Features include a backlit display, reinforced silicone keypad and separate battery compartment. The 2023P filters low-level fluctuations to provide a stable display when measuring unsteady pressure levels.

Accuracy 0.15% rdg + 0.1fs + digit (+20 to +30 °C), 0.15% rdg + 0.15% fs digit (elsewhere)
2 inputs via 1/8 BSP (4mm id, 6mm od hose)
Preset engineering units -mbar, Pa, inH2O, mH2O, inHg, mHg, kPa, PSI
Min/Max recorder and range lock
Dimensions 155 x 67 x 40 mm
Weight 180g

Note

1. Requires 2xAA batteries (please see 744-2199 ).
2. Particular care should be taken not to over pressure this device as this may rupture the sensor membrane. This is not covered by the manufacturers warranty.
3. The differential / gauge instruments will only measure positive pressures i.e. positive pressure applied to the positive port, or negative pressure applied to the negative port.
4. Not suitable for use with corrosive substances or cyclic hydrocarbons, e.g. motor oil, transmission fluid and freon. To use these instruments with these fluid components, isolation must be provided in the form of a buffer, such as mineral oil or dry air.

Supplied with

Instruction manual

Digitron 2000P Series - Manometers

Hand-held manometers series. Features found in the range include:

Robust design. IP67 with hose connected, operates between -10 and +50°C, backlit 12.7mm display, reinforced silicone key pad and separate battery compartment
Accuracy: 0.15% rdg + 0.1fs +digit (+20 to +30°C); 0.15% rdg + 0.15% fs digit (elsewhere)
Connection: 2 inputs via 1/8 BSP (4mm id, 6mm od hose)
Zeroing absolute user input of local barometric conditions for additional accuracy
Preset engineering units - mbar, Pa, inH²O, mH²O, inHg, mHg, kPa, PSI
Min/Max & Average recording, range lock & selectable auto off
Smoothing. Filters low level fluctuations to provide a stable display when measuring unsteady pressure levels
Automatic leak testing. Instrument measures pressure leakage from a system over a user specified test duration time. At the end of the test time a Pass/Fail message is displayed and logged to memory
Long battery life. Typically 200 hours (requires 2 x AA batteries, stock no 591-225)
Dimensions: 155 x 67 x 40mm, weight 180g
All instruments are supplied with instruction manual.

Model 202xP and 208xP additional features:

7 pre-set engineering units
Range lock, Min / Max recorder
Smoothing

Model 208xP additional features:

Automatic leak testing
250 memory logging on demand or at preset intervals
Min/Max and averaging recorder
4 digit reference coding of logged data
Cal function zero
Infra red serial interface to connect via DigiLink interface direct to a serial printer or PC
User-definable scaling

Specifications
Attribute Value
Best Accuracy ±0.15% + 0.0105 bar + 1 Digit
Number of Pressure Ports 2
Maximum Pressure Measurement 7bar
Minimum Pressure Measurement 0bar
Pressure Port Type Differential
Minimum/Maximum Recordings Yes
IP Rating IP67
Battery Type AA
Display Type LCD
Overpressure Maximum 10bar
Weight 180g
Width 67mm
Model Number p 2000P
Height 40mm
Length 155mm
Maximum Operating Temperature +50°C
Minimum Operating Temperature -10°C
Dimensions 155 x 67 x 40mm
Temporarily out of stock - back order for despatch 03/03/2020, delivery within 4 working days from despatch date
Price Each
MYR 1,713.18
units
Per unit
1 +
MYR1,713.18
Related Products
Both instruments feature a dust and waterproof case ...
Description:
Both instruments feature a dust and waterproof case to IP67 and can measure positive or negative (vacuum) gauge single input or differential pressures. Choice of nine displayed scalesRecording and display, in any scale, of max. and min. pressuresHold facilityAdjustable zeroTransient ...
Easy to use rugged hand held portable pressure ...
Description:
Easy to use rugged hand held portable pressure indicators, designed to offer accurate and reliable pressure measurement. Differential, Gauge & Absolute pressure measurement version are also available. 0.1% accuracyLarge 13mm 5 digit LCD display16 selectable pressure unitsSuitable for use with ...
Two versions of the C9500 series pressure meters ...
Description:
Two versions of the C9500 series pressure meters approved for use in potentially explosive atmospheres (group IIC gas types and T4 temperature classification) in most hazardous areas including Zone 0. Both instruments features twin inputs to measure positive and negative ...
The PM Series is a suitable replacement for ...
Description:
The PM Series is a suitable replacement for the conventional U-Tube, having a fast response coupled with high accuracy and at a low cost. The PM-80 instrument has the advantages of user selectable measurement units and smoothing function ensuring the ...