RS PRO Barrel PNP Magnetic Pickup, 2.5 mm Detection Range, 190 V

  • RS Stock No. 285-762
  • Manufacturer RS PRO
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): US
Product Details

Analogue Magnetic Pick-Up

These analogue output style transducers are available in three sizes: 1/4in (std.), 3/8in (high o/p) and 5/8in (heavy duty). They offer an inexpensive solution wherever a simple alternating waveform corresponding to movement past the pole piece is required. They are passive devices requiring no external power. They yield an output voltage in response to variations in their self-induced magnetic field caused by proximity to moving ferrous metal parts. They are steel encased for ruggedness and are supplied with two fixing nuts.

The output voltage is given for a load of 100kΩ with a 0.005in air gap at 20kHz operation. This corresponds quite closely to the pick up being 0.13mm from a 38mm diameter gear wheel with 30 teeth revolving at 13000rpm. The output will be different with other conditions and will be influenced by the composition of the gear wheel teeth. In unusual conditions it should be determined by experiment noting the following points:

Use the pick up with a high impedance load and position the pick up as close as is safe to the moving parts, clearances up to 2.5mm are quite normal
In a geared system, use the pick up with the highest speed gear wheel


The Heavy Duty version is supplied with a MS3101A 10SL 2P Connector.

Attribute Value
Body Style Barrel
Output Type PNP
Detection Range 2.5 mm
Terminal Type Connector
Thread Size 5/8-18 UNF-2A
Supply Voltage 190 V
Housing Material Stainless Steel
Dimensions 15.88 (Dia.) x 57.3 mm
Maximum Operating Temperature +108°C
Length 57.3mm
Minimum Operating Temperature -40°C
20 In Global stock for delivery within 4 - 6 working days
Price Each
Was MYR470.15
MYR 465.26
Per unit
1 - 5
6 - 11
12 +