RS PRO Barrel PNP Magnetic Pickup, 2.5 mm Detection Range, 60 V

  • RS Stock No. 285-756
  • Manufacturer RS PRO
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): US
Product Details

Analogue Magnetic Pick-Up

These analogue output style transducers are available in three sizes: 1/4in (std.), 3/8in (high o/p) and 5/8in (heavy duty). They offer an inexpensive solution wherever a simple alternating waveform corresponding to movement past the pole piece is required. They are passive devices requiring no external power. They yield an output voltage in response to variations in their self-induced magnetic field caused by proximity to moving ferrous metal parts. They are steel encased for ruggedness and are supplied with two fixing nuts.

The output voltage is given for a load of 100kΩ with a 0.005in air gap at 20kHz operation. This corresponds quite closely to the pick up being 0.13mm from a 38mm diameter gear wheel with 30 teeth revolving at 13000rpm. The output will be different with other conditions and will be influenced by the composition of the gear wheel teeth. In unusual conditions it should be determined by experiment noting the following points:

Use the pick up with a high impedance load and position the pick up as close as is safe to the moving parts, clearances up to 2.5mm are quite normal
In a geared system, use the pick up with the highest speed gear wheel

Note

The Heavy Duty version is supplied with a MS3101A 10SL 2P Connector.

//media.rs-online.com/t_line/L285756-01.gif
//media.rs-online.com/t_line/LD285756-01.gif
//media.rs-online.com/t_line/LE285756-12.gif
//media.rs-online.com/t_line/LI285756-01.gif
Specifications
Attribute Value
Body Style Barrel
Output Type PNP
Detection Range 2.5 mm
Terminal Type Wire Lead
Thread Size 3/8-24 UNF-2A
Supply Voltage 60 V
Housing Material Stainless Steel
Length 33mm
Dimensions 9.53 (Dia.) x 33 mm
Minimum Operating Temperature -40°C
Maximum Operating Temperature +105°C
88 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 226.73
units
Per unit
1 - 4
MYR226.73
5 - 9
MYR217.83
10 +
MYR215.50
Related Products
Magnetic cylinder sensors are used for detection, measuring ...
Description:
Magnetic cylinder sensors are used for detection, measuring and positioning in many crucial tasks. PA12 plastic body materialSuitable for T-slot and round-slot cylindersPNP NO or reed switchPNP output types have short circuit and reverse polarity protectionLED status display.
Magnetic cylinder sensors are used for detection, measuring ...
Description:
Magnetic cylinder sensors are used for detection, measuring and positioning in many crucial tasks. PA12 plastic body materialSuitable for T-slot and round-slot cylindersPNP NO or reed switchPNP output types have short circuit and reverse polarity protectionLED status display.
Stainless steel and PA12 plastic construction protected to ...
Description:
Stainless steel and PA12 plastic construction protected to IP67 Inserted directly into cylinder’s dovetail, fixed with a single stainless steel clamping screw Overload, short circuit and reverse polarity protection LED Status Display.
Sensor for pneumatic cylindersRecords the ring magnets in ...
Description:
Sensor for pneumatic cylindersRecords the ring magnets in the cylinder pistonsPrecise recording of position by means of accurate switching pointsOutput: N/OOutput current max. 100 mAResponse threshold 2.1 mTTraverse speed > 10 m/sPolarity reversal protectionLED status displayConnection lead with plug ...