RS PRO Holding Magnet, 3600N Holding Force 24V dc
- RS Stock No.:
- RS PRO
- COO (Country of Origin):
Electrical current is required to turn the magnet ON. Power is removed to turn the magnet OFF
Free leads, two-pole connector, Hirschman connector
Threaded hole/s in rear face of magnet
Bright nickel plated with machined face
Ideal for use in:
Door locking / holding
Short stroke / high force operations
Remote hold / release
Access control door magnets can be used across various domestic and commercial applications and offer solutions where a high security level is required. In some environments doors are required to be held open under normal conditions and them automatically released in the event of fire alarms and evacuation. Door magnets ensure that doors close automatically and are securely closed. Magnetic door holders are suitable for a range of applications, such as schools, nursing homes, and hospitals, to form part of a high-quality security system.
How to install a door magnet?
Generally, the electromagnet is attached to the door frame, whilst an armature plate is attached to the door itself. Occasionally brackets may be needed to ensure the magnet is in the correct position for contact with the plate. To achieve the optimal pull force of 100%, a contact area must be achieved using the recommended armature plates.
Where would an access control door magnet be useful?
|Supply Voltage||24V dc|