- RS Stock No.:
- 623-5123
- Manufacturer:
- RS PRO
8 In Global stock for delivery in 4-6 working days for West Malaysia, 5-8 working days for Free Trade Zone, and 7-10 working days for East Malaysia.
264 In Global stock for delivery in 4-6 working days for West Malaysia, 5-8 working days for Free Trade Zone, and 7-10 working days for East Malaysia.
Price Each (In a Pack of 2)
MYR37.635
units | Per Unit | Per Pack* |
2 - 8 | MYR37.635 | MYR75.27 |
10 + | MYR30.975 | MYR61.95 |
*price indicative |
- RS Stock No.:
- 623-5123
- Manufacturer:
- RS PRO
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
Product Details
RS PRO Flared Nozzle,1/2 In
Install these flared nozzles from RS PRO onto your machine coolant system to make adjusting air or liquid delivery safe and easy. The component creates a thin pattern of liquid flow that increases in width the further the hose is from the target area.
The nozzle has been manufactured from acetal copolymer, a non-conductive thermoplastic that is safe to use near electric or extreme temperature environments. The material is also resistant to organic chemicals, so it holds its shape even when in contact with high-pressure coolant compounds.
The flared design gives your hand the axis power it needs to turn a tightly wound modular hose gradually and easily to the desired amount. Use these nozzles to create a secure connection between different parts of your coolant system. The two interchangeable parts mean you have a spare, or you can use them on two separate dials as you construct your hose system to fit your requirements.
The nozzle has been manufactured from acetal copolymer, a non-conductive thermoplastic that is safe to use near electric or extreme temperature environments. The material is also resistant to organic chemicals, so it holds its shape even when in contact with high-pressure coolant compounds.
The flared design gives your hand the axis power it needs to turn a tightly wound modular hose gradually and easily to the desired amount. Use these nozzles to create a secure connection between different parts of your coolant system. The two interchangeable parts mean you have a spare, or you can use them on two separate dials as you construct your hose system to fit your requirements.
Features and Benefits
• Acetal copolymer material
• 1/2 inch system
• Flared nozzle type
• Length of 30 mm
• Width of 34 mm (flare)
• 1/2 inch system
• Flared nozzle type
• Length of 30 mm
• Width of 34 mm (flare)
Specifications
Attribute | Value |
---|---|
Type | Flared Nozzle |
Systems | 1/2in |
Material | Acetal Copolymer |