Megger LTW315-EU-BS Loop Impedance Tester 2 Wire, 3 Wire 440V ±10% CAT IV 300 V, IEC 61010 LTW315

  • RS Stock No. 198-435
  • Mfr. Part No. LTW315-EU-BS
  • Manufacturer Megger
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

LTW 300 Series

Earth loop impedance testers to verify the loop impedance of a live electrical circuit without the need to disconnect the electrical supply. The LTW300 series instruments offer a safe and easy 2 wire loop testing solution that does not trip 30mA RCDs and can be used on a wide range of voltages.

Backlit display
0.01Ω resolution
No-trip loop test on circuits with RCDs of ≥30 mA
3 phase circuits with RCD protection can be tested
Tests radial circuits where the circuit does not return to the origin, even where only a phase and neutral contacts are available.
10 second non trip loop test time with Auto test extension up to a further 10 seconds if noise is detected, to improve the accuracy of the test
High current loop testing for supplies that do not have an RCD fitted
AUTO START will start the loop test running as soon as the test leads are connected; no need to press the test button means much safer testing
PFC Display up to 20kA
Voltage and frequency measurement
110Vac systems including 110V centre tap to earth (55V phase to earth) can be tested on the secondary winding.
IP54 Weatherproof case
Optional 10A fused 2 wired test leads and crocodile clip set
Complies with IEC61010-1 300V CATIV safety standard and meets EN61557

Note

RS is an authorised Megger distributor. Purchased though RS this product is eligible for the Megger extended 3 Year warranty

Supplied with

Test lead set with crocodile clips, mains socket test lead, 8 AA alkaline batteries, hard carry case and instructions.

Megger Loop Impedance Tester

The Megger earth loop impedance testers are 2-wire, 440V and ±10% test loop accuracy. This tester is to verify the loop impedance of a live electrical circuit without the need to disconnect the electrical supply. The LTW300 series instruments offer a safe and easy but do not trip 30mA RCDs and can be used on a wide range of voltages. A loop test is performed with only 2 test leads. This can be either phase to earth, phase to neutral and phase to phase.

Supplied with
Test lead set with crocodile clips, mains socket test lead, 8 AA alkaline batteries, hard carry case and instructions.

Features and Benefits


Backlit display
• 0.01Ω resolution
• No-trip loop test on circuits with RCDs of ≥30 mA
• 3-phase circuits with RCD protection can be tested
• Tests radial circuits where the circuit does not return to the origin, even where only a phase and neutral contacts are available.
• 10second non-trip loop test time with autotest extension up to a further 10seconds
• if noise is detected, to improve the accuracy of the test
• High current loop testing for supplies that do not have an RCD fitted
• AUTO START will start the loop test running as soon as the test leads are connected no need to press the test button means much safer testing
• PFC display up to 20kA
• Voltage and frequency measurement
• 110Vac systems including 110V centre tap to earth (55V phase to earth) can be tested on the secondary winding.
• Optional 10A fused 2 wired test leads and crocodile clip set

Certifications


EN61557
• EN61010-1
• EN61010
• IEC61010-1 300V CATIV

Specifications
Attribute Value
Loop Impedance Test Type 2 Wire, 3 Wire
Maximum Voltage Measurement 440V
Best Loop Test Accuracy ±10%
Non-Trip Loop Test Yes
Safety Category CAT IV 300 V, IEC 61010
Display Type LCD
Battery Type AA
Battery Life 2000 Tests
Power Source Battery
Dimensions 203 x 148 x 78mm
Weight 1kg
Height 78mm
Safety Category Level CAT IV
Minimum Operating Temperature -10°C
Length 203mm
Safety Category Voltage 300V
Width 148mm
Model Number p LTW315
Maximum Operating Temperature +50°C
Temporarily out of stock - back order for despatch 09/04/2020, delivery within 4 working days from despatch date
Price Each
MYR 3,596.12
units
Per unit
1 +
MYR3,596.12
Related Products
Offering data storage and download capabilities via a ...
Description:
Offering data storage and download capabilities via a USB port, the Fluke 1625-2 can perform 4 types of earth ground measurement. This tester is able to measure ground loop resistance using only clamps, this method doesn't require the use of ...
MW9320 Earth tester suitable for the verification, maintenance ...
Description:
MW9320 Earth tester suitable for the verification, maintenance and periodic testing of electrical installations. And the evaluation of protective measures in LV-installations, troubleshooting on live installations. Suitable for testing on CAT IV installations. Supports all live tests on LV electrical ...
The PROFITEST MXTRA Starter Pack Kit consists of ...
Description:
The PROFITEST MXTRA Starter Pack Kit consists of the M520P test insrument along with a VARIO plug adapter set, F2000 universal carrying pouch, rechargeable battery pack and battery charger. Loop and line impedance measurement Measurement of insulation resistance using nominal ...
The PROFITEST XTRA M500Y Profi PackageInstallation Test Kit ...
Description:
The PROFITEST XTRA M500Y Profi PackageInstallation Test Kit comprises a M520P test instrument along with a VARIO plug adapter set, E-Clip 2 generator clamp for earthing measurements, Z3512A clamp for earthing measurements, PRO RE2 measuring adapter for 2-clamp measuring methods, ...