Eaton EASY Logic Module, 24 V dc, 12 x Input, 9 x Output Without Display

  • RS Stock No. 443-0225
  • Mfr. Part No. EASY822-DC-TCX
  • Manufacturer Eaton
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): DE
Product Details

Easy 800

The Easy 800 intelligent relays offer a wide set of features and much greater functionality than the standard intelligent relay. Networking capability enables systems up to 300 I/O to be controlled using distributed intelligence architecture. For short runs this is simply achieved using RJ45 patch leads (e.g. stock no. 504-3232 etc) and end of line terminations stock no. 479-6418. To achieve the maximum network length of 1km, suitably wired premises would be required. The network can be configured with a program on one controller and all others acting as slaves, or with individual programs on each controller using results from the actions of other controllers (the I/O status of all controllers is visible to all others on the network). Four types have a separate 10 bit, 0-10V analogue output.Direct interface to the MFD display or X-system touch screen HMI systems enables operators to be kept informed.Internal features include, 256 lines of control circuit, PID function, stepper motor control, arithmetic function, Encoder input, PWM output, Serial output, and many other advanced functions.

Local expansion using the Easy i/o expansion units.
Network up to 8 units over 1000m
High level network interfaces for: Profibus, CanOpen, DeviceNet, Ethernet.
Programmable using drag and drop PC software
PID for temperature or process control
Stepper motor function for positioning applications
PWM output for heating applications
Serial output for modem and txt applications
Real time clock
Operating temperature range: -25 to 55°C

Eaton Easy 200, 400, 500, 700 and 800

Two or four inputs on dc and 24Vac powered versions can be configured as 10 bit, 0-10V analogue
Two 1kHz counter inputs on dc powered versions of the 500 and 700, (four 3/5kHz inputs on the 800)
Available as lower cost versions without display or panel keys (part numbers ending in X), for applications where no user interaction is required, and where the unit will be programmed using software which is available separately
Units with displays and panel keys can be programmed directly, or by using the software noted above, they can also display user configured messages (16 on the 500 and 700, and 32 on the 800) which include variable data fields.
16 multi-function timers, 16 up/down counters, (32 of each on the 800) and four retentive process run hour counters
Can be combined with MFD-Titan displays/controllers
Dimensions: H 90mm x W 71.5mm x D 58mm (easy500); H 90mm x W 71.5mm x D 58mm (easy 700//800)

The easy family of logic controllers is available with a choice features and options making it suitable for a wide variety of applications including small to medium sized machine automation, HVAC, lighting and access control within buildings. The easy500 and 700 are enhanced versions of the easy 400 and 600. They offer many new features while retaining full backward compatibility and are available with 12Vdc, 24Vdc, 24Vac and 100-240Vac power supply/input voltage options for maximum user flexibility.
Digital I/O expansion and AS-i or Profibus DP network modules are available for easy600, 700, 800 and MFD-Titan controllers. However, as there is only one connector at the right hand end of the controller, only one of these options may be implemented. This limitation does not extend to the easy-NET facility on the easy800 which is a completely separate feature, with it’s own dedicated RJ45 connectors on the top of the controller. In other words, easy800 controllers can have their I/O expanded whilst also being networked with up to eight other easy800 or MFD-Titan controllers via the built in easy-NET facility.

Note

(Figures in brackets in Onboard I/O and Outputs columns are for Transistor output types)

Specifications
Attribute Value
Series EASY
Supply Voltage 24 V dc
Output Type Transistor
Number of Outputs 9
Input Type Analogue, Digital
Number of Inputs 12
Mounting Type DIN Rail
Width 107.5mm
Display Included No
Depth 72mm
Length 110mm
Dimensions 110 x 107.5 x 72 mm
Termination Type Screw
Module Type Logic Control Module
Network Type EasyNet
Maximum Operating Temperature +55°C
Minimum Operating Temperature -25°C
Output Current 500 mA
2 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 1,964.88
units
Per unit
1 +
MYR1,964.88
Related Products
The Easy Control EC4P brings a new level ...
Description:
The Easy Control EC4P brings a new level of capability to the Easy range. Combining the simplicity of the Easy system using local expansion and in-built networking facilities, with the power of internationally recognised programming standards.Offering both Easy-net and CanOpen ...
Twido programmable controller from Telemecanique providing flexible automation ...
Description:
Twido programmable controller from Telemecanique providing flexible automation solutions for the control systems. Designed to be user-friendly and flexible, with powerful control functions. 24 Vdc inputsIsolated outputs100base-TX ethernet via RJ45 (stock no. 528-8643 only)Output rating for relay outputs: 2A@ ...
ALPHA 2 is an enhanced version of the ...
Description:
ALPHA 2 is an enhanced version of the existing ALPHA, achieving solutions that were not previously possible. With many powerful new features, it is ideal for building and smaller industrial automation applications. Key enhancements include a tripling of program capacity ...
The Easy 700 intelligent relays offer the user ...
Description:
The Easy 700 intelligent relays offer the user both power and simplicity. With a fixed set of functions, the Easy basic may be configured in the place of many Pagecontrol-panel devices and circuit wiring either on the front of the ...