Lenze Locking Bush ETP EXPRESS 22MM

  • RS Stock No. 477-6824
  • Mfr. Part No. ETP EXPRESS 22MM
  • Manufacturer Lenze
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): SE
Product Details

ETP Express Locking Bushes

Unique single screw hydraulic shaft to hub locking bush offering infinite radial and axial adjustment. Designed for ultra-fast mounting of gears, pulleys, sprockets etc where frequent operations and very high accuracy are required.

Very high concentricity and self-centering
Ultra-fast, locking and un-locking with single pressure screw
Radial pressure screw for easy access
Automatic release when screw is loosened
Ideal for applications with very small diameter hubs
H7-h7 hub bore and shaft tolerances
Radial concentricity 0.03mm
Temperature range -30 to +85°C, refer to technical dept. if ambient temperature is below 0°C

Caution

To select the correct bush and hub the external diameter of the outer hub should be sufficient to withstand the stresses exerted. To calculate the size, multiply the bush outside diameter by the relevant factor: Steel x 1.5, Cast Iron x 2.0, Aluminium x 2.5. If the selected hub diameter is greater than or equal to the calculated size, then the selected size is suitable.

//media.rs-online.com/t_line/L477678-01.gif
Specifications
Attribute Value
Shaft Diameter 27mm
Outside Diameter 22mm
Flange Diameter 55.5mm
Length 46mm
Rated Torque 130Nm
Material Steel
Minimum Operating Temperature -30°C
Maximum Operating Temperature +85°C
29 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 724.16
units
Per unit
1 - 5
MYR724.16
6 +
MYR687.09
Related Products
Standard series – this range is the most ...
Description:
Standard series – this range is the most popular, being used in most applications. This new design of Shrink Disc is made from high alloy forged rings and is practically indestructible. Replacing the smaller 4071 design, these units are available ...
Identical in design and function to the traditional ...
Description:
Identical in design and function to the traditional 7012 device, this unit is made of stainless steel for applications requiring rust free installation. Torque capacity is somewhat reduced due to the nature of stainless steel.
Unique hydraulic shaft to hub locking bush offering ...
Description:
Unique hydraulic shaft to hub locking bush offering infinite radial and axial adjustment. Designed for frequent operations for very accurate mounting of gears, pulleys, sprockets etc. High concentricity and self-centeringFast, easy locking and un-locking with few pressure screwsAutomatic release when ...