Lenze Locking Bush ETP CLASSIC 20MM

  • RS Stock No. 477-6638
  • Mfr. Part No. ETP CLASSIC 20MM
  • Manufacturer Lenze
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
Product Details

ETP Classic Locking Bushes

Unique hydraulic shaft to hub locking bush offering infinite radial and axial adjustment. Designed for frequent operations for very accurate mounting of gears, pulleys, sprockets etc.

High concentricity and self-centering
Fast, easy locking and un-locking with few pressure screws
Automatic release when screws are loosened
Ideal for applications with smaller diameter hubs
H7-h7 hub bore and shaft tolerances
Radial concentricity 0.04mm
Temperature range -30 to +85°C, refer to technical dept. if ambient temperature is below 0°C

Caution

To select the correct bush and hub the external diameter of the outer hub should be sufficient to withstand the stresses exerted. To calculate the size, multiply the bush outside diameter by the relevant factor: Steel x 1.7, Cast Iron x 2.2, Aluminium x 2.7. If the selected hub diameter is greater than or equal to the calculated size, then the selected size is suitable.

//media.rs-online.com/t_line/L477661-01.gif
Specifications
Attribute Value
Shaft Diameter 45mm
Outside Diameter 20mm
Flange Diameter 28mm
Length 42mm
Rated Torque 125Nm
Material Steel
Minimum Operating Temperature -30°C
Maximum Operating Temperature +85°C
5 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 760.00
units
Per unit
1 - 5
MYR760.00
6 +
MYR723.08
Related Products
Standard series – this range is the most ...
Description:
Standard series – this range is the most popular, being used in most applications. This new design of Shrink Disc is made from high alloy forged rings and is practically indestructible. Replacing the smaller 4071 design, these units are available ...
Unique single screw hydraulic shaft to hub locking ...
Description:
Unique single screw hydraulic shaft to hub locking bush offering infinite radial and axial adjustment. Designed for ultra-fast mounting of gears, pulleys, sprockets etc where frequent operations and very high accuracy are required. Very high concentricity and self-centeringUltra-fast, locking and ...
Unique mechanical shaft to hub locking bush offering ...
Description:
Unique mechanical shaft to hub locking bush offering infinite radial and axial adjustment. Self-centering with small built-in dimensions. Fast mounting with few tightening screws. Designed for mounting of gears, pulleys, cams, sprockets etc, where more frequent removal is required. Self-centering ...