SKF Closed Linear Plain Bearing, LPBR 25

  • RS Stock No. 308-0914
  • Mfr. Part No. LPBR 25
  • Manufacturer SKF
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): AT
Product Details

LPBR Plain Bushings - Closed

Share the same dimensions as LBBR ball bushings
Polyacetal with specific polyethylene bearing surfaces
Low-maintenance.
Good emergency running properties and low “stick”
Resistant to heavy static stress and insensitive to shocks
Initial lubrication necessary, even if dry running is required later

//media.rs-online.com/t_line/LD308087-01.gif

SKF Plain Bushings

Specifications
Attribute Value
Linear Plain Bearing Type Plain
Configuration Closed
Inside Diameter 25mm
Outside Diameter 35mm
Length 40mm
Dynamic Load Rating 12000N
Static Load Rating 3400N
Temporarily out of stock - back order for despatch 17/03/2020, delivery within 4 working days from despatch date
Price Each
MYR 100.56
units
Per unit
1 - 5
MYR100.56
6 - 11
MYR97.54
12 +
MYR95.49
Related Products
The Compact Linear Bushing is distinguished by its ...
Description:
The Compact Linear Bushing is distinguished by its compact dimensions. Through the use of integrated metal locking rings, this type eliminates the need for the otherwise typical axial fasteners in the mounting hole. Also available in corrosion-resistant format. Low cost ...
Standard SKF linear bearings can be used to ...
Description:
Standard SKF linear bearings can be used to construct linear guidance systems over a wide variety of applications. These bearings are manufactured to ISO 10285 standards. SKF linear ball bearings have the advantage of being corrosion resistant due to a ...
’Frelon’ liner resists most chemicals and withstands vibration ...
Description:
’Frelon’ liner resists most chemicals and withstands vibration and shock. Operating temperature range is -240 to +260°C. Suitable for rotary motion. Silent, self-lubricating operation.
Aluminium housing (8 and 10mm ID), anodised aluminium ...
Description:
Aluminium housing (8 and 10mm ID), anodised aluminium housing 12mm - 30mmLiner JUM-01 as standardRecommended tolerance for shaft: h6 - h10.