SKF Bearing Housing LSCS 16

  • RS Stock No. 285-0267
  • Mfr. Part No. LSCS 16
  • Manufacturer SKF
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
Product Details

LSCS Shaft Blocks

LSCS shaft blocks are aluminium alloy extrusions. The individual block can clamp one shaft end only. The base has two through holes for mounting.

//media.rs-online.com/t_line/L285025-24.gif
//media.rs-online.com/t_line/LD285025-01.gif
//media.rs-online.com/t_line/LF285025-10.gif
Specifications
Attribute Value
Housing Height 35.5mm
Housing Length 56mm
Housing Width 15mm
10 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 181.89
units
Per unit
1 - 5
MYR181.89
6 - 11
MYR172.90
12 +
MYR165.61
Related Products
Shaft support blocks are used to support shafts ...
Description:
Shaft support blocks are used to support shafts and locate the ends of the shaft.They are suitable for all the solid and hollow shafts in this catalogue.They are made from either an aluminium alloy or pressure diecast zinc.Series GWA is ...
Closed ball bushings and plain bearings for XY ...
Description:
Closed ball bushings and plain bearings for XY positioning, pick and place applications and precision linear motion systems.,Plain bearings to be used in heavy shock, vibration, high acceleration or high speed situations which are unsuitable for linear ball bearings.,Note that ...
Standard SKF linear bearings can be used to ...
Description:
Standard SKF linear bearings can be used to construct linear guidance systems over a wide variety of applications. These bearings are manufactured to ISO 10285 standards. SKF linear ball bearings have the advantage of being corrosion resistant due to a ...
Closed ball bushings and plain bearings for XY ...
Description:
Closed ball bushings and plain bearings for XY positioning, pick and place applications and precision linear motion systems.,Plain bearings to be used in heavy shock, vibration, high acceleration or high speed situations which are unsuitable for linear ball bearings.,Note that ...