Gold 10 A Flush Mount Plate Light Switch, 2 Way Screwed Satin, 2 Gang BS Standard 86mm 1 1, Albany Plus Screw

  • RS Stock No. 832-6537
  • Mfr. Part No. K4672SAG
  • Manufacturer MK Electric
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

10A Flush Switches

The MK Electric Albany Plus range of plate switches features stylish curved design, the switches are manufactured from the finest materials and maintain their high quality appearance for years to come. These MK switches do not have to be derated when used with fluorescent or inductive loads. The terminals in the back of these plate switches have a funnel entrance and are upwards facing, to make installation easier. The Albany Plus decorative switches will look great in both contemporary and classic interiors.

10A Plateswitches
Flush mount
Can be wired as either one way or two ways

Standards

BS EN 60669-1: 2000

MK Albany Plus Range

Manufactured from the finest materials and coated with a special heat-cured powder lacquer finish. The Albany Plus range is highly scratch resistant maintaining its subtle good looks for many years and adding that touch of class to the finest decor.

3-pin operated safety shutter on all sockets
In-line terminals which are top facing enable wires to be cut to same length and allow easy screwdriver access
All screws are backed out and captive for ease of installation One screwdriver fits all products
Double pole switches on all products
Neutral contact makes first and breaks last for added safety
Minimum 3mm contact gap for safe switch isolation
Fuse carrier can be padlocked in open position for safe maintenance

Specifications
Attribute Value
Switch Type Plate
Number of Gangs 2
Number of Poles 1
Number of Ways 2
Mount Type Flush
Current Rating 10 A
Colour Gold
Series Albany Plus
Finish Satin
Faceplate Fixing Screwed
Height 86mm
Fixing Standard BS Standard
Number of Modules 1
Length 86 mm
Termination Type Screw
Discontinued product
Related Products
When body heat is detected, the load is ...
Description:
When body heat is detected, the load is switched on. At a preset time after movement has ceased the load is automatically switched off. Available for standard lighting or electrical appliance applications. Auto/ON/OFF selections180° detection area with adjustable 8m detection ...
Replaces the existing wall switch and can be ...
Description:
Replaces the existing wall switch and can be used as a normal ON/OFF switch.,The double switch version has the same functionality as the single, but has an additional switch for manual control of another light. Turns room lights ON and ...
When body heat is detected, the load is ...
Description:
When body heat is detected, the load is switched on. At a preset time after movement has ceased the load is automatically switched off. Available for standard lighting or electrical appliance applications. Available in pushbutton, touch activated or splashproofRequires permanent ...
They can be individually changed without re-wiring the ...
Description:
They can be individually changed without re-wiring the whole assembly. All units are 1 module wide unless otherwise stated. Voltage rating 240V a.c. 50Hz.Dimensions:Switch Module 25 mm wide x 59 mm high and 25 mm deepBuzzer Unit 25 mm wide ...