C41S Light Curtain Sender, 60 Beams, 30mm Resolution

  • RS Stock No. 492-4821
  • Mfr. Part No. C41S-1203AA300
  • Manufacturer Sick
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): DE
Product Details

C4000, Type 4, Hand Protection

The C4000 safety light is widely used by industry in high risk safety applications where point of operation protection is required to control category 4, EN 954. The system consists of a transmitter unit and receiver and can be used with optional interfaces where required.

Applications:

Press brakes, power press & hydraulic press, robot cells, special purpose machinery

Features:

Simple assembly and alignment
Short response time (≤34ms)
Alignment Aid
2 OSSD (Output Signal Switching Device) outputs
Seven segment display
EDM (External device monitoring)
M12 Connector
Small housing profile 28.5mm x 33.5mm
IP65
Tested and approved to type 2, IEC 61496

Note

Installation and operation of this safety device must be in strict accordance with accompanying operating instruction. Further guidance on the use of Active Opto-electronic Protective Devices (AOPD) is available from Health & Safety Executive guidance note HSG180.

Light Curtain

Specifications
Attribute Value
Range C4000
Series C41S
Beam Resolution 30mm
Component Type Sender
Safety Type 4
SIL IEC 61508 3
PL EN ISO 13849-1 E
Number of Beams 60
Protective Height 1200mm
Maximum Scanning Distance 6m
Maximum Response Time 34 ms
Supply Voltage 24 V dc
Height 1296mm
Terminal Type M12 Connector
Length 33.5mm
Width 28.5mm
Dimensions 28.5 x 33.5 x 1296 mm
Features EDM, RES
Application Hand
Discontinued product