Flowline Switch-Tek Series Vertical Mounting Ultrasonic Level Sensor

  • RS Stock No. 124-0137
  • Mfr. Part No. LU10-1305
  • Manufacturer Flowline
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): US
Product Details

Flowline Switch-Tek LU10 Level Switch

Premium range of CSA approved intrinsically safe ultrasonic level point switches from Flowline offer a reliable sensing solution within chemical, solvent, hydrocarbon & petroleum based liquids. Thanks to the universally mounting style of the Switch-Tek series they can be used in high level or low level alarm configurations

Features and Benefits

PFA Teflon or Polypropylene sensor suitable for use within hazardous environments
Can be used as a redundant alarm within classified applications
Highly suited for use with corrosive liquids
Can be mounted both through the side or top wall of the tank
NO/NC 60VA wiring polarity relay

Note

Suitable for use with Smart Trak & Switch Pak installation fittings

Flowline Sensors

Specifications
Attribute Value
Device Type Ultrasonic Level Switch
Mounting Type Vertical
Body Material PP
Cable Length 3m
Minimum Operating Temperature -40°C
Maximum Operating Temperature +80°C
Maximum DC Voltage 36V
Maximum Pressure 10bar
Gasket Material FKM
Current Rating 25 mA
Series Switch-Tek
9 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 1,837.15
units
Per unit
1 +
MYR1,837.15
Related Products
Capacitive fill level switch with inverse frequency shift ...
Description:
Capacitive fill level switch with inverse frequency shift technologyConfigurable outputsSensitivity settingLED status displayVersion with connection cableFor detecting liquids, granulates, slurry, foam and separating layers in confined systems.
Housed in a 1 piece M16 threaded polysuphone ...
Description:
Housed in a 1 piece M16 threaded polysuphone case resistant to most liquidsSuitable for use with; alcohol, vinegar, mineral oils, water, battery acid, dilute lyes, hydrochloric acid, lactic acid Sensitivity can be adjusted when working with highly reflective liquidsReverse polarity ...
Ultrasonic liquid level switch intended for level detection ...
Description:
Ultrasonic liquid level switch intended for level detection at a fixed point when liquid fills the gap between the crystals. Polyphenylene sulphide construction, ingress protection to IP67/68. Vessel pressure 5 bar maximumWet switching level detection at a fixed point when ...
SITRANS LVS100 and LVS200 vibrating level switchs for ...
Description:
SITRANS LVS100 and LVS200 vibrating level switchs for the detection of high and low levels in bulk solids and dusty powders including cement, lime and flour. Vibrating fork sensors operate by oscillating two forks at their natural frequency in air. ...