Sensata/Cynergy 3 MS Series Cable Mount HDPE Float Switch, Float, 5m Cable, SPNC, 250V ac Max, 24V dc Max

The MS series of cable end float switches are designed for controlling levels in large tanks, cisterns or reservoirs. These level switches can be directly installed on submersible pumps, making them perfect for any water projects. This casing is made of a blow moulded polyethylene giving it a robust and slick design. All models are highly reliable and excellent quality.

Capable of working down to 100 m in depth

Need a float switch to install with your submersible pump? This unit from Sensata Cynergy3 is designed for use in large tanks, cisterns and reservoirs. It's rated to 10 bar so it can be submerged up to 100m deep. The switch's case is made from blow-moulded polyethylene (PE), with non-hygroscopic, closed-cell expanded polyurethane injected around the switch housing to hermetically seal the workings. The normally closed (NC) output turns the circuit off when the liquid rises above a set level. Thanks to direct power switching, this is an easy choice to operate.

• Moving stainless-steel ball actuator gives an electrical life of 200,000 operations
• Rated at 750V AC and 25W DC, which means it can handle high loads
• Operating temperature range of 0°C to +45°C, for versatile use in a wide range of environments
• Certified to Restriction of Hazardous Materials (RoHS) standards, so it won't release harmful chemicals if damaged

The switch can be used in both salt and fresh water as well as in food oils. It's not recommended for use in alcohols, fuel or machine oils.