Broyce Control Level Controller -, 230 V ac 1
- RS Stock No.:
- 361-1603
- Mfr. Part No.:
- B8LCR 230VAC
- Manufacturer:
- Broyce Control
Discontinued product
Alternative
This product is not currently available. Here is our alternative recommendation.
- RS Stock No.:
- 361-1603
- Mfr. Part No.:
- B8LCR 230VAC
- Manufacturer:
- Broyce Control
Legislation and Compliance
- COO (Country of Origin):
- GB
Product Details
Liquid Level Controller, Plug In Base
Controls maximum and/or minimum levels of conductive liquids
’Pump-up’ or ’Pump-down’ modes selectable via switch
Adjustable sensitivity, 5 to 100kΩ
One or two probe operation
Low voltage, ac current across probes prevents electrolysis phenomena
Ambient temperature; -20 to + 60°C
Dimensions; H89mm x W40mm, x D92mm
’Pump-up’ or ’Pump-down’ modes selectable via switch
Adjustable sensitivity, 5 to 100kΩ
One or two probe operation
Low voltage, ac current across probes prevents electrolysis phenomena
Ambient temperature; -20 to + 60°C
Dimensions; H89mm x W40mm, x D92mm
Note
1. If using metal tank, connect “pin 1” and earth to the tank
2. If supply is interrupted for ≤0.5s in “pump-up” mode, the relay will energise immediately.
In “pump-down” mode relay remains de-energised
3. For single probe operation, link terminals “pin 1” and “pin 7”
2. If supply is interrupted for ≤0.5s in “pump-up” mode, the relay will energise immediately.
In “pump-down” mode relay remains de-energised
3. For single probe operation, link terminals “pin 1” and “pin 7”
Approvals
UL recognised component for Canada and US
Liquid Level Relays are used to monitor the levels of conductive liquids, and are available in Up/Down, Minimum, Maximum, and Fill/Empty variations. Liquid Level Relays are straightforward to install and safe to use.
Application Examples
Liquid Level Relays (Conductive Level Sensors) are used in a wide variety of applications including waste water management and the monitoring and management of corrosive liquid media, and designed specifically to provide for the:
Monitoring and control of liquid levels
Protection of pumps against dry running
Ability to detect liquid leaks in a system
Control of media mixing ratios
Control of liquid levels
Protection of pumps against dry running
Ability to detect liquid leaks in a system
Control of media mixing ratios
Control of liquid levels
Specifications
Attribute | Value |
|---|---|
| Number of Inputs | 1 |
| Probe Voltage | 17V ac |
| Supply Voltage | 230 V ac |
| Overall Length | 92mm |
| Overall Width | 40mm |
| Overall Depth | 80mm |
| Minimum Operating Temperature | -20°C |
| Maximum Operating Temperature | +60°C |